| < Track Sections | FRS300 Home | Plug-In Jacks > |
Track Accessories & Hangers
Electro-Rail Coupling Set – 4 Pole, 50 Amp
Item Number: 11676
4 pole, 50 amp coupling set for FRS300 Plug-In Series. Consists of side plates, cover and bus bar connectors used to join track sections. One coupling is required for every two sections of track joined.
Electro-Rail Dead End Cap – 4 Pole
Item Number: 11679
4 pole end cap for FRS300 Plug-In Series. Used for closing the end of a track run.
Electro-Rail End Feed Set – 4 Pole, 50 Amp
Item Number: 11678
50 amp, 4 pole end feed. Used for connection to power supply at the end of track run. Serves as end cover. Concentric knockouts at end (1/2 or 3/4 conduit). Terminals included accomodate No. 14 to No. 6 strand wire. Fits FRS300 Plug-In Series.
Electro-Rail Tie Rod Hanger
Item Number: 12291
Track hanger for tie rod. Fits FRS100 & FRS200 Series, also FRS300 Plug-In Series. Allows direct attachment of 3/8" tie rods at any point between track joints. Permits easy leveling of track sections. When used with curved track, field notching of track top flange is required for clearance of clamping bolt. A minimum of two track hangers required for each straight track section.
Electro-Rail Straight Track Hanger
Item Number: 12284
Track hanger for FRS100 & FRS200 Series, also FRS300 Plug-In Series. For mounting straight track sections. Mounting hole will take 3/8" diameter bolt. They can be attached to straight track at any point between track joints. Not suitable for curved track sections. Minimum of two track hangers required for each straight track section.
Electro-Rail Clevis Support for Tie Rod Installations
Item Number: 12283
Clevis support for tie rod applications. Malleable iron, with 3/8" cross bolt and 3/8"-16 tapped hole for tie rod. Must be used in conjunction with FRS-124 and FRS-105 track hangers.
Electro-Rail Duplex Busway Hanger Set
Item Number: 11675
Duplex busway hanger set. For FRS100 & FRS200 Series, also FRS300 Plug-In Series. For 10' support spacing to be used at track joint over coupling.
Electro-Rail Low-Level Track Hanger
Item Number: 12363
Hanger (low level). For FRS100 & FRS200 Series, also FRS300 Plug-In Series. Used in place of track hanger FRS-105 where head room is limited. Takes 3/8" diameter bolts. Can be attached to straight track at any point between track joints. Not suitable for curved track. Minimum of two track hangers required for each straight track section.