| < Track Sections | FR100 Home | Trolleys > |
Track Accessories & Hangers
Feedrail Coupling Plate Set for FR100 Series (Feedrail '100')
Item Number: FR102
Set of two heavy gauge pressed steel plates serves as a coupling for track sections and as a hanger for attaching to supporting members. Removable snap on covers permit ready access to the bus bar joints.
Feedrail Dead End Cap for FR100 Series (Feedrail '100')
Item Number: FR107
Set of two heavy gauge pressed steel plates and box for closing the end of a track run. Also serves as a hanger fo attaching to supporting members. Include a trolly stop.
Feedrail Center Feed Box for FR100 Series (Feedrail '100') - 3 Pole, 100 Amp
Item Number: FR103
Set of two heavy gauge pressed steel plates, box and covers, through which electrical connection to the power supply is made between any two track sections. Serves as a track coupling and hanger for attaching supporting members. Has concentric knockouts for 3/4", 1", 1-1/4" or 1-1/2" conduit in the top. complete with pressure type terminals accommodating No. 14 to 0 stranded wire.
Feedrail Reversible End Feed Box for FR100 Series (Feedrail '100') - 3 Pole, 100 Amp
Item Number: FR109
Set of two heavy gauge pressed steel plates and a two piece box through which electrical connection to the power supply can be made at the end of a track run. Reversible box permits conduit connection at top, bottom of end. Has concentric knockouts for 3/4", 1', 1-1/4" or 1-1/2" conduit. Also serves as a hanger for attaching track to supporting members. Complete with pressure type terminals accommodating No. 14 to 0 stranded wire.
Feedrail Auxilliary Track Hanger Set
Item Number: FR140
Heavy gauge pressed steel plates for intermediate mounting of track sections to supporting members. Fits over top of straight track housing rib at any of the insulator bolting points. Complete with 3/8" mounting bolt.
Electro-Rail Clevis Support for Tie Rod Installations
Item Number: 12283
Clevis support for tie rod applications. Malleable iron, with 3/8" cross bolt and 3/8"-16 tapped hole for tie rod. Must be used in conjunction with FRS-124 and FRS-105 track hangers.
Feedrail Transfer Point Hanger Set for FR100 Series (Feedrail '100')
Item Number: FR124
Set of two heavy gauge pressed steel plates formed to match flared ends of transfer sections. Use as hanger for attaching to supporting mebers at open end of transfer track sections.