Lights, Motors, Stands & Tables
In the textile industry, high-quality lighting, machine motors, stands, and tables are essential for maintaining efficiency and precision in production. At Universal Sewing Supply, with over 50 years of experience, we fully appreciate the critical role these components play. Our extensive experience enables us to select and provide only the best products that meet the industry's rigorous standards, ensuring optimal performance and durability. By leveraging our long-standing relationships with trusted manufacturers, we are able to offer these essential tools in a timely and cost-effective manner. This ensures that our clients benefit from reliable equipment and support, allowing them to focus on their core operations with confidence. If you are unable to find what you are looking for, please contact our sales department.
Enduro Continuous-Run Motor, 1/2 Horsepower, 220 Volt, 3 Phase, 1725 RPM
Item Number: 57417
Continuous Run Motor for Buttonsewer, Buttonholer and Bartacker Machines. Precision balance for smooth quiet performance. Fan ventilated for cooler running. Built-in belt tightener adjustable for correct belt tension. Enclosed OSHA type belt guard for safety; fully adjustable. Oversize ball bearings pre-lubricated and permanently sealed. 6 volt light tap for low voltage light fixture. 2/5 H.P., 220 Volt, 3-Phase, 1725 RPM. Complete with pulley.
2 Spool Thread Stand & Power Conduit
Item Number: 55213
Dual purpose thread stand; stand pipe also serves as a conduit for power supply. Complete with mounting flange, stand pipe, stand pipe insulators spool holder, thread guides and mounting screws. Ergonomic white.
3 Spool Thread Stand & Power Conduit
Item Number: 55214
Dual purpose thread stand; stand pipe also serves as a conduit for power supply. Complete with mounting flange, stand pipe, stand pipe insulators spool holder, thread guides and mounting screws. Ergonomic white.
3-Phase Circut Breaker Switch, 2.5 - 3.3 Amps
Item Number: 54947
This 3-phase circuit breaker switch eliminates the need for fuses and is equipped with a lockout bracket to comply with OSHA requirements. It operates extra quietly, free from any humming, and features a calibrated amperage adjustment for 240 volts without the need for a plug. It comes with prewired #16/4 cords: a 16-foot input cord and a 4-foot output cord to the motor, both with terminals at each end and adjustable in length. Each unit is individually boxed for convenience.
3-Phase Circut Breaker Switch, 4.4 - 6.6 Amps
Item Number: 54948
This 3-phase circuit breaker switch eliminates the need for fuses and is equipped with a lockout bracket to comply with OSHA requirements. It operates extra quietly, free from any humming, and features a calibrated amperage adjustment for 240 volts without the need for a plug. It comes with prewired #16/4 cords: a 16-foot input cord and a 4-foot output cord to the motor, both with terminals at each end and adjustable in length. Each unit is individually boxed for convenience.
3-Piece Waste Chip Chute Set for Industrial Overlock Sewing Machines
Item Number: 17933
Waste slide assembly works compatible with Brother, Consew, Jack, Juki, Merrow, Pegasus, Rimoldi, Sunstar, Wilcox & Gibbs, Yamata, Yamato, Zoji and many other industrial overlock sewing machines.
3-Way Air Foot Valve, 1/8 Inch NPT
Item Number: 12177
3-Way air foot valve 4-1/2" deep by 3-1/2" wide by 1-3/4" high. Weighs 2-1/4 lbs. Air line connections are 1/8-27 female pipe thread. Air flow 30 cfm at 100 lbs. p.s.i. Operates on line pressures up to 150 p.s.i. Black wrinkle painted cast iron construction with skid-proof base pad. Mounting 7/32" diameter holes on 2-7/8" centers.
3-Way Compact Air Foot Valve, 1/8 Inch NPT
Item Number: 12176
3-Way compact air foot valve, 2-7/8" deep by 2-1/2" wide by 1-1/4" high. Weighs 7 ounces. Air line connections are 1/8-27 female pipe thread. Air flow 30 cfm at 100 lbs. p.s.i. Operates on line pressures up to 150 p.s.i. Black painted pressed steel construction.
3-Way Gaurded Manual Foot Valves, 1/4 Inch NPT
Item Number: 12540
Designed to meet OSHA requirements. Guard protects valve and foot from falling objects. Four rubber feet may be removed for permanent mounting. May be operated from sitting or standing position. <b>Model 250F</b> may be used as 2 or 3-way valve N.C. <b>Model 250-4F</b> is a 4-way/5-port valve furnished N.C./N.O. All port connections are 1/4" IPT. Will handle cylinders up to 3-1/2" diameter.
4 Spool White Thread Stand
Item Number: 57429
White in color. Mounts through 11/16" hole drilled in table top. Complete with mounting hardware.
4-Way Gaurded Manual Foot Valves, 1/4 Inch NPT
Item Number: 12541
Designed to meet OSHA requirements. Guard protects valve and foot from falling objects. Four rubber feet may be removed for permanent mounting. May be operated from sitting or standing position. <b>Model 250F</b> may be used as 2 or 3-way valve N.C. <b>Model 250-4F</b> is a 4-way/5-port valve furnished N.C./N.O. All port connections are 1/4" IPT. Will handle cylinders up to 3-1/2" diameter.
6 Spool White Thread Stand
Item Number: 57430
White in color. Mounts through 11/16" hole drilled in table top. Complete with mounting hardware.
Adhesive-Backed Table Measuring Tape, 20 Yards, Left-to-Right, 1-Yard Repeating
Item Number: 5179
LT TO RT TAPE - 20YDS REPEAT
Adhesive-Backed Table Measuring Tape, 20 Yards, Right-to-Left, 1-Yard Repeating
Item Number: 5180
RT TO LT TAPE - 20YDS REPEAT
Adhesive-Backed Table Measuring Tape, 36 Inches & 90 Centimeters
Item Number: 5181
Precision 36 inch and 90 centimeter table measuring tape is easy to read; just press it on. Pressure sensitive backing sticks to most surfaces. For sewing, stitching, examining and marking tables. Black numerals on bright white background run left to right. Metric graduated in 1 and 5 millimeters and inches in 1/16ths.
Adhesive-Backed Table Measuring Tape, 36 Inches & 90 Centimeters, 4 Pack
Item Number: AMZ1010
Precision 36 inch and 90 centimeter table measuring tape is easy to read; just press it on. Pressure sensitive backing sticks to most surfaces. For sewing, stitching, examining and marking tables. Black numerals on bright white background run left to right. Metric graduated in 1 and 5 millimeters and inches in 1/16ths. 4 Pack.
Adjustable Sewing Light for Standard Base or C-Clamp Mount
Item Number: 55576
Completely adjustable in every direction with a standard base or fit to table with a "c" clamp bracket mounting. May be used with either 6.3 or 120 volt bulb.
Alex Needle Lights Dichroic Lamp 120/12V Table Mount with Transformer
Item Number: 16679
Alex Needle Lights can help achieve the best quality and productivity from your most valuable assets, your people and your equipment.
Amattco 4-Way Knee Operated Air Switch
Item Number: 18786
For use with Single Acting Spring Return or Double Acting Cylinders, Air Operated Scissor Cutters, Impact Cutters, Air Vacuums, etc. 4-way valve may be operated as a 2 or 3-way valve. All valve ports are 1/8" female pipe, but supplied with 1/4" tube X 1/8" elbow inlet fitting and 1/4" tube X 1/8" male outlet connectors, as well as knee pad and mounting screws. Manufactured by Universal in U.S.A.
Ball Joint Treadle Rod Complete Assembly
Item Number: 55652
This new ball joint design allows more than 2 times the amount of metal to retain the ball in place; therefore the added durability decreases ball pull out and wear of joint tremendously. Consists of 2 solid constructed treadle rods with ball joints and a new style one piece constructed treadle rod clamp.
Brake Shoe with Pad for Feitsew, Olympic (FT20B)
Item Number: 13867
Brake Shoe with Pad for Feitsew, Olympic (FT20B)
Brake Shoe with Pad for Marshall, Universal, Enduro (TB17)
Item Number: 11767
Brake Shoe with Pad for Marshall, Universal, Enduro (TB17)
Bright Laser with Intersecting Crossed Lines
Item Number: 7158
The laser modules have a plug on the back. A cable of 5 feet (1.5m) is supplied with each module. Extension leads are also available. Each module has focus and line length adjustment features. The modules are radio and high frequency protected.
Bright Laser with Long Line & Dot
Item Number: 7157
The laser modules have a plug on the back. A cable of 5 feet (1.5m) is supplied with each module. Extension leads are also available. Each module has focus and line length adjustment features. The modules are radio and high frequency protected.
Bright Laser with Variable Length Straight Lines
Item Number: 7156
The laser modules have a plug on the back. A cable of 5 feet (1.5m) is supplied with each module. Extension leads are also available. Each module has focus and line length adjustment features. The modules are radio and high frequency protected.
Cast Iron Foot Pedal for Industrial Sewing Machines
Item Number: 53162
Small foot pedal used on industrial overlock machines, buttonhole machines, button sewers and more. Includes bolts and nuts.
Clutch Disc for Industrial, Marshall, Universal, Enduro, 4-5/16" OD x 3" ID
Item Number: 12704
Clutch Disc for Industrial, Marshall, Universal, Enduro, 4-5/16" OD x 3" ID
Clutch Disc for M9/M15 EZ Clutch Motors, 4-15/16" OD x 9/16" ID
Item Number: 61503
Clutch Disc for M9/M15 EZ Clutch Motors, 4-15/16" OD x 9/16" ID
Clutch Disc for Mitsubishi, 4-15/16" OD, 1/8" Cork Thickness
Item Number: 12724
Clutch Disc for Mitsubishi, 4-15/16" OD, 1/8" Cork Thickness
Clutch Disc for New Style Swifty, 4-15/16" OD, 7/32" Cork Thickness
Item Number: 13888
Clutch Disc for New Style Swifty, 4-15/16" OD, 7/32" Cork Thickness
Consew Electric Brushless Industrial Sewing Machine Servo Motor (Consew CSM1000)
Item Number: CSM1000
The Consew CSM1000 Industrial Sewing Machine Motor is highly efficient, saving up to 70% electricity. With 3/4HP and 550W power, it suits various sewing tasks, from light to heavy-duty. Compatible with a range of machines, it ensures reliable performance throughout.
Consew Electric Brushless Industrial Sewing Machine Servo Motor with Needle Positioner (Consew CSM1001)
Item Number: CSM1001
The Consew CSM1001 Industrial Sewing Machine Motor is highly energy-efficient, saving up to 70% electricity. With 3/4HP power and 550 Watts output, it suits various sewing tasks, from light to heavy-duty. Compatible with different sewing machines, it offers reliable performance and includes a needle positioner, unlike the CSM1000.
Consew Heavy Duty Brushless Industrial Sewing Machine Servo Motor (Consew CSM3000)
Item Number: CSM3000
The Consew CSM3000 Electric Brushless Servo Motor is an energy-efficient powerhouse for industrial sewing machines, saving up to 70% electricity. With 1HP and 750 Watts, it handles light to heavy-duty tasks seamlessly across various machine types, ensuring efficient and powerful sewing operations.
Cork Disc for 1/3HP Consew, Feitsew, 4-5/16" OD x 3" ID
Item Number: 58267
Cork Disc for 1/3HP Consew, Feitsew, 4-5/16" OD x 3" ID
Cork Disc for Old Style Swifty, 4-11/16" OD x 2-13/16" ID
Item Number: 13873
Cork Disc for Old Style Swifty, 4-11/16" OD x 2-13/16" ID
Cork Insert for Extra-Large Treadle
Item Number: 50715
Treadle with cork insert can be used with every flat brace stand set-up. Complete with treadle lugs and mounting bracket.
Dichroic Bulb, Narrow, 12 Volt, 20 Watt
Item Number: 9439
Dichronic bulbs produce 40% less heat overall than Halogen bulbs and directs approximately 70% less heat forward towards the needle. 12 volt, 20 watt.
Dichroic Bulb, Standard, 12 Volt, 12 Watt
Item Number: 9440
Dichronic bulbs produce 40% less heat overall than Halogen bulbs and directs approximately 70% less heat forward towards the needle. 12 volt, 12 watt.
Eaton Bussmann Series HM Modular Fuse Block
Item Number: 9026
Three-pole, Class H, Class K, 10 kAIC, 250 Volt, 0-30 Amp
Electric Automatic Foot Lifter
Item Number: 14017
Electronic foot lift mounts under oil pan. Fits almost all single needle lockstitch machines. Knee switch must be ordered separately. Operates on 24 volts.
Electro-Rail Twist & Lock Nylon Plug and Connector – Female, 20 Amp, 4 Wire Connector
Item Number: 1120
FEMALE 20A 4-WIRE CONNECTOR
Electro-Rail Twist & Lock Nylon Plug and Connector – Male, 20 Amp, 4 Wire Connector
Item Number: 1100
MALE 20A 4-WIRE CONNECTOR
Enduro 100 Watt Sewing Machine Motor with Foot Pedal & Belt for Home Sewing Machines, Black
Item Number: HM100
The Enduro HM100 sewing motor, with copper windings and a commutator, offers durable performance. Operating at 110V, 100W, and 6000 RPM, it fits most domestic machines with its heavy-duty mount. The kit includes a foot pedal, belt, and replacement carbon brush set for convenience. Color: black.
Enduro 100 Watt Sewing Machine Motor with Foot Pedal & Belt for Home Sewing Machines, White
Item Number: HM100W
The Enduro HM100 sewing motor, with copper windings and a commutator, offers durable performance. Operating at 110V, 100W, and 6000 RPM, it fits most domestic machines with its heavy-duty mount. The kit includes a foot pedal, belt, and replacement carbon brush set for convenience. Color: white.
Enduro 550 Watt Electric Sewing Machine Servo Motor (Enduro EM550)
Item Number: SM550
The Enduro SM-550 Industrial Sewing Machine Servo Motor offers high-torque performance with 3/4 HP, 550W power, and clutchless operation. Adjustable speed knob ensures ease of use, while its energy efficiency saves costs. Kit includes all necessary components for easy installation and quiet, reliable operation.
Enduro Clutch Motor, 1/2 Horsepower, 115 Volt, Single Phase, 1750 RPM
Item Number: 9623
MOTOR 1/2HP 115V 1750RPM 1P
Extension Cables for Laserlyte Laser Alignment Systems, 10 Feet
Item Number: 17899
Extension Cables for Laserlyte Laser Alignment Systems, 10 Feet
Extra-Large Gray Treadle with Cork Insert
Item Number: 50713
Treadle with cork insert can be used with every flat brace stand set-up. Complete with treadle lugs and mounting bracket.
Graphite Impregnated Cork Disc for Amco, 4-15/16" OD x 3-3/4" ID
Item Number: 52561
Graphite Impregnated Cork Disc for Amco, 4-15/16" OD x 3-3/4" ID
Halotech 6 Volt Ergonomic Halogen Needle Light
Item Number: 7000
Halotech Halogen Needle Lights provide close to daytime visibility at the point of operation where it is most required. Operators prefer to use them because they improve their overall working conditions and efficiency. They are designed for minimum maintenance. With the energy efficient lamp, replacement is up to 75% less than regular bulbs. These needle lights resist the vibration of equipment being used, are very easy to adjust, and they do not obstruct the workplace.
Hashima Industrial Thread Winder
Item Number: 12122
This compact thread winder handles all thread types and spools with or without flanges. It features a quiet motor, adjustable timer, and high-speed capability for up to 4 spools. Easy to use, low maintenance, and efficient with 110 Volt AC power.
High-Intensity Light with 21" Arm, Bakelite Shade & Double-Contact Bayonet Base
Item Number: 6005
For double-contact bayonet base 6, 8, 12 or 110 volt bulbs. These fixtures are designed for high-intensity concentrated illumination without glare or shadow spots. Fixture with 13" arm for use with machine mounting. Fixture with 21" arm for use with table mounting. Fixtures have 8 foot power cord with plug and "T" rated switch. Polished aluminum reflector.
Hook for Bottom Belts, Style 15B, 500 Pieces
Item Number: 5768
Hook for Bottom Belts, Style 15B, 500 Pieces
Hook for Top Belts, Style 16B, 500 Pieces
Item Number: 5769
Hook for Top Belts, Style 16B, 500 Pieces
Incandescent Double Contact Clear Bulb, 6 Volts
Item Number: 9446
Incandescent Double Contact Clear Bulb, 6 Volts
Incandescent Double Contact Frosted Bulb, 6 Volts
Item Number: 9835
Incandescent Double Contact Frosted Bulb, 6 Volts
Incandescent Sealed Beam Floodlight Bulb, 6.3 Volts, 17 Watts
Item Number: 9650
Designed for all sealed beam fixtures, including Singer Light #996257. Has standard base. Will fit regular light sockets. These bulbs are designed to function from motor light leads.
Knee Pad for 6937 Standard Knee Lifter
Item Number: 5809
Knee pad is made of soft rubber for extra comfort while operating knee lifters. Easy to assemble; slip over plate and it is ready to use. Inside slot dimensions for plate fitting: 2-3/8" x 4-3/8" with 1/2" lip for gripping to plate.
Knee Plate for 6937 Standard Knee Lifter
Item Number: 50760
Knee pad is made of soft rubber for extra comfort while operating knee lifters. Easy to assemble; slip over plate and it is ready to use. Inside slot dimensions for plate fitting: 2-3/8" x 4-3/8" with 1/2" lip for gripping to plate.
Knee Switch for AK-31 Automatic Foot Lifter
Item Number: 14135
Knee Switch for AK-31 Automatic Foot Lifter
Koiled Kord Coiled Electrical Cord, 16 Gauge, 3 Wire
Item Number: 11020
Koiled Kords are safer, neater, and more convenient than straight cords. They stay tangle-free, don't dangle or trail on floors, and retract neatly. Designed for durability with oil-resistant neoprene covering. Each 48" coil extends up to 25 feet and can be cut to size, making multiple cord sets. 16 gauge, 3 wire.
Koiled Kord Coiled Electrical Cord, 16 Gauge, 4 Wire
Item Number: 11024
Koiled Kords are safer, neater, and more convenient than straight cords. They stay tangle-free, don't dangle or trail on floors, and retract neatly. Designed for durability with oil-resistant neoprene covering. Each 48" coil extends up to 25 feet and can be cut to size, making multiple cord sets. 16 gauge, 4 wire.
Koiled Kord Coiled Electrical Cord, 18 Gauge, 4 Wire
Item Number: 11023
Koiled Kords are safer, neater, and more convenient than straight cords. They stay tangle-free, don't dangle or trail on floors, and retract neatly. Designed for durability with oil-resistant neoprene covering. Each 48" coil extends up to 25 feet and can be cut to size, making multiple cord sets. 18 gauge, 4 wire.
Linemaster Treadlite II Single Pedal Metal SPDT Foot Switch, 15Amp, 30Volt
Item Number: 7874
Trim, small, lightweight, instantaneous! Accurate control in modern treadle switches. Single pole, double throw, momentary contact interior that can be wired open or closed. Rubber non-skid treadle and base pad. Formed steel casing with black finish. Rated at 7 amps, 125/250VAC. Weighs 7 ounces. 3-1/2" long, 2-5/8" wide and 13/16" high.
Magnetic 3-Phase Circut Breaker Switch, 2.5 - 3.3 Amps
Item Number: 19868
Replaces old style CB300 and 600 switches which were mechanically unreliable. A must for electronic motors. No danger of single phase operation - upon loss of power the switch and motor shut down completely. Just push on the button and power is restored. No danger of overloading main circuit upon startup.
Magnetic 3-Phase Circut Breaker Switch, 4.4 - 6.6 Amps
Item Number: 19934
Replaces old style CB300 and 600 switches which were mechanically unreliable. A must for electronic motors. No danger of single phase operation - upon loss of power the switch and motor shut down completely. Just push on the button and power is restored. No danger of overloading main circuit upon startup.
Magnetic U-Shaped 6 LED Sewing Machine Light, 110 Volt
Item Number: 7026
Magnetic U-Shaped 6 LED Sewing Machine Light, 110 Volt
Motor Pulley, 3/4" Bore with Keyway, 1-1/2" Pitch Diameter
Item Number: 53799
Motor Pulley, 3/4" Bore with Keyway, 1-1/2" Pitch Diameter
Motor Pulley, 3/4" Bore with Keyway, 1-3/4" Pitch Diameter
Item Number: 52360
Motor Pulley, 3/4" Bore with Keyway, 1-3/4" Pitch Diameter
Motor Pulley, 3/4" Bore with Keyway, 1-5/8" Pitch Diameter
Item Number: 55242
Motor Pulley, 3/4" Bore with Keyway, 1-5/8" Pitch Diameter
Motor Pulley, 3/4" Bore with Keyway, 1-7/8" Pitch Diameter
Item Number: 53800
Motor Pulley, 3/4" Bore with Keyway, 1-7/8" Pitch Diameter
Motor Pulley, 3/4" Bore with Keyway, 2" Pitch Diameter
Item Number: 52361
Motor Pulley, 3/4" Bore with Keyway, 2" Pitch Diameter
Motor Pulley, 3/4" Bore with Keyway, 2-1/2" Pitch Diameter
Item Number: 52365
Motor Pulley, 3/4" Bore with Keyway, 2-1/2" Pitch Diameter
Motor Pulley, 3/4" Bore with Keyway, 2-1/4" Pitch Diameter
Item Number: 52363
Motor Pulley, 3/4" Bore with Keyway, 2-1/4" Pitch Diameter
Motor Pulley, 3/4" Bore with Keyway, 2-1/8" Pitch Diameter
Item Number: 52362
Motor Pulley, 3/4" Bore with Keyway, 2-1/8" Pitch Diameter
Motor Pulley, 3/4" Bore with Keyway, 2-3/4" Pitch Diameter
Item Number: 52366
Motor Pulley, 3/4" Bore with Keyway, 2-3/4" Pitch Diameter
Motor Pulley, 3/4" Bore with Keyway, 2-3/8" Pitch Diameter
Item Number: 52364
Motor Pulley, 3/4" Bore with Keyway, 2-3/8" Pitch Diameter
Motor Pulley, 3/4" Bore with Keyway, 2-5/8" Pitch Diameter
Item Number: 53158
Motor Pulley, 3/4" Bore with Keyway, 2-5/8" Pitch Diameter
Motor Pulley, 3/4" Bore with Keyway, 2-7/8" Pitch Diameter
Item Number: 52367
Motor Pulley, 3/4" Bore with Keyway, 2-7/8" Pitch Diameter
Motor Pulley, 3/4" Bore with Keyway, 3" Pitch Diameter
Item Number: 52368
Motor Pulley, 3/4" Bore with Keyway, 3" Pitch Diameter
Motor Pulley, 3/4" Bore with Keyway, 3-1/2" Pitch Diameter
Item Number: 52372
Motor Pulley, 3/4" Bore with Keyway, 3-1/2" Pitch Diameter
Motor Pulley, 3/4" Bore with Keyway, 3-1/4" Pitch Diameter
Item Number: 52370
Motor Pulley, 3/4" Bore with Keyway, 3-1/4" Pitch Diameter
Motor Pulley, 3/4" Bore with Keyway, 3-1/8" Pitch Diameter
Item Number: 52369
Motor Pulley, 3/4" Bore with Keyway, 3-1/8" Pitch Diameter