Labor Saving Devices
At Universal Sewing Supply, we understand that efficiency is the cornerstone of success in the commercial textile industry. Our labor-saving devices are not just tools—they are essential components that transform how businesses operate. By streamlining operations, our labor saving products can significantly reduce manual effort, enhance precision, and speed up production times. This means fewer errors, lower labor costs, and a quicker turnaround for orders, all of which translate into increased profitability and competitive edge. Investing in our products not only elevates your production capabilities but also ensures that you remain at the forefront of industry innovation, meeting market demands with unmatched agility and excellence. If you are unable to find what you are looking for, please contact our sales department.
Belt & Tie Turner with 4 Tubes
Item Number: 5808
Belt and Tie Turner for all types of turning operations on garments of all kinds, as well as a pocketbook or other like articles. Simple to operate. Just insert appropriate tube size, slip the item on the tube, move handle down and release rod. Rod goes back to starting position and is ready for the next item. Installation just requires attaching to table or other convenient location with screws or bolts. Comes complete with 7 tubes with steel collars; sizes 3/8" (1), 1/2" (2), 5/8" (2) and 3/4" (2).
Collar Turner, Complete
Item Number: 6944
For pointing and turning of collars, cuffs, straps, etc. Top needle tip (spring loaded) prevents damaging the lightest of materials.
Universal 10" Binding Wheel, Ball Bearing with Brake
Item Number: 13916
Reel tilts to any angle and can be used in any position (vertically or horizontally). Ball bearings help eliminate drag. Special brake eliminates binding overrun when machine stops. Complete with mounting clamp.
Universal 12" Tape & Binding Reel, Ball Bearing with Brake
Item Number: 13929
Ball bearing delivers binding freely and brake prevents spinning. Reel may be positioned overhead, under table, or in any other position on table. Reel can be tilted to any angle. Made in U.S.A.
Universal 8" Tape, Ribbon & Binding Reel, Ball Bearing with Brake
Item Number: 96396
The Universal 8" Tape & Ribbon Binding Reel offers versatility with its tilting design for any angle or position, smooth ball bearings to reduce drag, and a special brake to prevent binding over-run. Comes with a mounting clamp for easy setup.
Upper Tape Feeder with 70mm Roller
Item Number: 4618
High quality electronic metering device provides accurate feeding of elastic for perfect fit. 70mm (2-3/4") roller width accommodates most elastics. Complete with mounting base. 110 Volt.
Complete Deluxe Friction Disc for 3/8" Bore, 10" Diameter
Item Number: 13932
Complete with ball bearing hubs, knobs & special brake to eliminate binding overruns. 3/8" Bore.
Complete Deluxe Friction Disc for 3/8" Bore, 12" Diameter
Item Number: 13935
Complete with ball bearing hubs, knobs & special brake to eliminate binding overruns. 3/8" Bore.
Complete Deluxe Friction Disc for 3/8" Bore, 8" Diameter
Item Number: 13327
Complete with ball bearing hubs, knobs & special brake to eliminate binding overruns. 3/8" Bore.
Bar Knob for Friction Discs, 1/4-20 x3/4" Stud
Item Number: 13326
Bar Knob for Friction Discs, 1/4-20 x3/4" Stud
Elastic & Tape Tension Guide Bracket
Item Number: 5404
For stretching elastics and strip rubber in elasticized items or for retarding tapes and laces in order to create shirring or fullness. Tensions are generally used in conjuction with some form of folding attachment (foot or guide). Double spring construction for equalized tension. Table type fastens to either top, front or underside of the machine table. Adjustable to any width up to 2-1/2". Built-in separating clips convert tension into tape guide.
Spring Collar Assembly for Tape Racks with 3/8" Bore
Item Number: 53106
Spring Collar Assembly for Tape Racks with 3/8" Bore
Cone Bearing, Stubby, 1-1/2" OD, 3/8" Bore
Item Number: 58208
Cone Bearing, Stubby, 1-1/2" OD, 3/8" Bore
Deluxe Rod Clamp Assembly, 1/2" x 1/2" Cross Clamp
Item Number: 13325
Deluxe Rod Clamp Assembly, 1/2" x 1/2" Cross Clamp
Deluxe Rod Clamp Assembly, 3/8" x 3/8" Cross Clamp
Item Number: 13310
Deluxe Rod Clamp Assembly, 3/8" x 3/8" Cross Clamp
3" Knurled Roller for Pullers, 1/2" Bore
Item Number: 50438
3" Knurled Roller for Pullers, 1/2" Bore
Lovejoy 3-Piece Type Coupling Body, 1/2" Bore, 1/4 HP
Item Number: 13260
3-Piece type. Order TWO Bodies (ends) of the same HP rating with desired bore and ONE Spider (center) of the same HP rating for complete coupling.
Lovejoy 3-Piece Type Coupling Body, 3/8" Bore, 1/4 HP
Item Number: 13259
3-Piece type. Order TWO Bodies (ends) of the same HP rating with desired bore and ONE Spider (center) of the same HP rating for complete coupling.
Lovejoy 3-Piece Type Coupling Spider, 1/4 HP
Item Number: 2745
3-Piece type. Order TWO Bodies (ends) of the same HP rating with desired bore and ONE Spider (center) of the same HP rating for complete coupling.
Machined Steel Shaft Collar, 1/2" ID, 7/8" OD, 3/8" Width
Item Number: 1797
Machined Steel Shaft Collar, 1/2" ID, 7/8" OD, 3/8" Width
Standard Cloth Puller with 2 Rollers
Item Number: 50075
Equipped with 3” stainless steel rollers (1 knurled and 1 smooth). Black painted aluminum mechanism cover eliminates thread wrapping around gears and pulley. Black painted base made of heavy duty cast iron. Standard model used on machines such as Singer 112, 212, 281; Union Special, etc.
Universal Heavy-Duty Pneumatic Tape Cutter, 2-1/2 Inch
Item Number: 11689
The Heavy-Duty Air Operated Tape Cutter uses 40 p.s.i. air pressure for precise cutting of tape and elastic. It features a double-acting cylinder, easy hinge mounting, knee-operated air switch, replaceable blades, blade guard, and includes all necessary accessories. Optional Filter Regulator Kit No. 16308 recommended.
Universal Heavy-Duty Pneumatic Tape Cutter, 3 Inch
Item Number: 11955
The Heavy-Duty Air Operated Tape Cutter uses 40 p.s.i. air pressure for precise cutting of tape and elastic. It features a double-acting cylinder, easy hinge mounting, knee-operated air switch, replaceable blades, blade guard, and includes all necessary accessories. Optional Filter Regulator Kit No. 16308 recommended.
Universal Heavy-Duty Pneumatic Tape Cutter, 4 Inch
Item Number: 11707
The Heavy-Duty Air Operated Tape Cutter uses 40 p.s.i. air pressure for precise cutting of tape and elastic. It features a double-acting cylinder, easy hinge mounting, knee-operated air switch, replaceable blades, blade guard, and includes all necessary accessories. Optional Filter Regulator Kit No. 16308 recommended.
Filter, Regulator & Lubricator Kit, 1/8 Inch
Item Number: 16308
1/8" & 1/4" Filter/Regulator combination complete with automatic drain. For use with air cylinders. 1/8" comes with 3 feet of 1/4" O.D. poly hose, 1/4" tube X 1/8" male pipe fitting for line connection. 1/4" comes with 5 feet of 3/8" O.D. poly hose, 3/8" tube X 1/4" male pipe fitting for line connection and coupling for quick disconnect. Mounting bracket with screws also included.
4-Way Normally Closed Clippard Valve, 1/8 Inch NPT
Item Number: 18541
The MJV/MJVO series are high flow 1/8" NPT ported 2-Way, 3-Way and 4-Way valves that change their flow path when the stem is either depressed or released (spring return). The 2-Way and 3-Way valves are offered in both Normally-Closed and Normally-Open versions.
Brass Air Hose Barb, 1/4" OD Tube, 1/8" NPT
Item Number: 18406
Double-Barb Brass Fittings permit fast, sure connections of thermo-plastic tubing (polyethylene). One-piece, push-on design features a barbed lip that rings the tip of the insert. Safe, positive, leak-proof connections that won't shake loose, won't pull out, won't pop off when Barb Fittings are used within the normal pressure and temperature ranges of tubing used.
Brass Air Hose Barb, 90° Elbow, 1/4" OD Tube, 1/8" NPT
Item Number: 18410
Double-Barb Brass Fittings permit fast, sure connections of thermo-plastic tubing (polyethylene). One-piece, push-on design features a barbed lip that rings the tip of the insert. Safe, positive, leak-proof connections that won't shake loose, won't pull out, won't pop off when Barb Fittings are used within the normal pressure and temperature ranges of tubing used.
Brass Air Hose Barbs, 1/4" OD Tube, 1/4" NPT
Item Number: 18407
Double-Barb Brass Fittings permit fast, sure connections of thermo-plastic tubing (polyethylene). One-piece, push-on design features a barbed lip that rings the tip of the insert. Safe, positive, leak-proof connections that won't shake loose, won't pull out, won't pop off when Barb Fittings are used within the normal pressure and temperature ranges of tubing used.
Universal Adjustable L-Fitting with Nitrile O-Rings
Item Number: 16779
Stud is stainless steel hex head with screwdriver slot. Complete with O-ring and gasket. Permits port to be set in any direction 360°. Secure by tightening screw stud.
#4-40 x 1/2" Pan Head Phillips Head Machine Screw
Item Number: 12405
#4-40 x 1/2" Phillips Head Machine Screw
#5-40 x 3/8" Pan Head Phillips Machine Screw
Item Number: 18700
#5-40 x 3/8" Pan Head Phillips Machine Screw
1/4-20 x 1/2" Button Head Socket Cap Screw
Item Number: 18970
1/4-20 x 1/2" Button Head Socket Cap Screw
1/4-20 x 1/4" Button Head Socket Cap Screw
Item Number: 54457
1/4-20 x 1/4" Button Head Socket Cap Screw
1/4-20 x 3/4" Phillips Pan Head Machine Screw
Item Number: 11446
1/4-20 x 3/4" Phillips Pan Head Machine Screw
1/4-20 x 5/16" Round Head Intermediate Machine Screw, Slotted
Item Number: 18695
1/4-20 x 5/16" Round Head Intermediate Machine Screw, Slotted
1/4-28 x 3/4" Socket Head Cap Lock Screw
Item Number: 18699
1/4-28 x 3/4" Socket Head Cap Lock Screw
Acuator for Universal & Clinton Heavy-Duty Cutters
Item Number: 12507
Acuator for Universal & Clinton Heavy-Duty Cutters
Adjustable Knife Guard for Universal & Clinton Heavy Duty Cutters, Complete
Item Number: 10523
Adjustable Knife Guard for Universal & Clinton Heavy Duty Cutters, Complete
Adjusting Stud for Universal & Clinton Heavy-Duty Cutters
Item Number: 10472
Adjusting Stud for Universal & Clinton Heavy-Duty Cutters
Air Cylinder Mounting Clevis Pin, 1/4" x 1-1/2"
Item Number: 10683
Air Cylinder Mounting Clevis Pin, 1/4" x 1-1/2"
Arm with Bushing for Universal & Clinton Heavy-Duty Cutters
Item Number: 12404
Arm with Bushing for Universal & Clinton Heavy-Duty Cutters
Base Plate for Universal & Clinton Heavy Duty Cutters
Item Number: 18783
Base Plate for Universal & Clinton Heavy Duty Cutters
Bimba Air Cylinder 1-1/16" x 1" (Bimba 091-P)
Item Number: 10012
Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.
Bimba Piston Rod Clevis Assembly, 1-1/16" Bore, 5/16-24 Rod Thread, 1/4" Clip Diameter
Item Number: 16555
Includes clevis, nut, pin and 2 spring clips.
Bimba Piston Rod Clevis Assembly, 1-1/2" Bore, 7/16-20 Rod Thread, 3/8" Clip Diameter
Item Number: 16557
Includes clevis, nut, pin and 2 spring clips.
Blade for Air Operated Impact Cutters, 1 Inch
Item Number: 57238
Blade for Air Operated Impact Cutters, 1 Inch
Block Pin for Universal & Clinton Heavy-Duty Cutters
Item Number: 12645
Block Pin for Universal & Clinton Heavy-Duty Cutters
Bottom Knife for Universal & Clinton Heavy-Duty Cutters, 2-1/2"
Item Number: 10454
BOTTOM KNIFE 2-1/2"
Bottom Knife for Universal & Clinton Heavy-Duty Cutters, 3"
Item Number: 10393
Bottom Knife for Universal & Clinton Heavy-Duty Cutters, 3"
Bottom Knife for Universal & Clinton Heavy-Duty Cutters, 4"
Item Number: 10463
Bottom Knife for Universal & Clinton Heavy-Duty Cutters, 4"
Clippard Air Cylinder,1-1/2" Bore S/S Cylinder, Clevis Mount, Rotating Rod (Clippard CDR-24-1)
Item Number: 10289
Clippard Air Cylinder,1-1/2" Bore S/S Cylinder, Clevis Mount, Rotating Rod (Clippard CDR-24-1)
Clippard Air Pilot Actuator, #10-32
Item Number: 11069
Single acting, spring return, 15/32-32 female thread mounts to Clippard miniature valves and other devices, Made in U.S.A.
Clippard Air Pilot Actuator, 1/8 Inch NPT
Item Number: 11070
Single acting, spring return, 15/32-32 female thread mounts to Clippard miniature valves and other devices, Made in U.S.A.
Compression Spring for Universal & Clinton Heavy-Duty Cutters
Item Number: 10351
Compression Spring for Universal & Clinton Heavy-Duty Cutters
Guard for Universal & Clinton Heavy-Duty Cutters, fits 2-1/2 & 3 Inch Cutters
Item Number: 12403
Guard for Universal & Clinton Heavy-Duty Cutters, fits 2-1/2 & 3 Inch Cutters
Guard for Universal & Clinton Heavy-Duty Cutters, fits 4 Inch Cutters
Item Number: 13516
Guard for Universal & Clinton Heavy-Duty Cutters, fits 4 Inch Cutters
Knife for Union Special Back Tacking Attachments
Item Number: 57078
Knife for Union Special Back Tacking Attachments
Male Run Tee, 1/8" Female NPTF x 1/8" Male NPTF x 1/8" Female NPTF
Item Number: 16247
Male Run Tee, 1/8" Female NPTF x 1/8" Male NPTF x 1/8" Female NPTF
Pin Block for Universal & Clinton Heavy-Duty Cutters
Item Number: 12643
Pin Block for Universal & Clinton Heavy-Duty Cutters
Replacement Suction Cup for Label Dispenser, Large
Item Number: 13837
Replacement Suction Cup for Label Dispenser, Large
Roller Thrust Bearing Race, 1/2" Bore, 15/16" OD, 1/32" Thickness
Item Number: 10307
Roller Thrust Bearing Race, 1/2" Bore, 15/16" OD, 1/32" Thickness
Shaft Assembly for Universal & Clinton Heavy-Duty Cutters
Item Number: 10271
Shaft Assembly for Universal & Clinton Heavy-Duty Cutters
Shaft Collar for Universal & Clinton Heavy-Duty Cutters
Item Number: 12652
Shaft Collar for Universal & Clinton Heavy-Duty Cutters
Snap Action Air Pilot Operator with Reset, #10-32
Item Number: 10897
For Humphrey TAC, TAC2, and TAC3 Valves. Threads onto any TAC push button valve and Micro Switch (No. 2669). Air pressure applied to pilot port drives 'V' cup sealed piston to actuate valve or switch push button. Maximum pilot pressure 125 p.s.i.
Spring for Union Special Back Tacking Attachments
Item Number: 57074
Spring for Union Special Back Tacking Attachments
Striker Plate for Air Operated Impact Cutters
Item Number: 57240
Striker Plate for Air Operated Impact Cutters
Thrust Bearing for Universal & Clinton Heavy Duty Cutters
Item Number: 55952
Thrust Bearing for Universal & Clinton Heavy Duty Cutters
Top Blade Holder for Universal & Clinton Heavy-Duty Cutters
Item Number: 10509
Top Blade Holder for Universal & Clinton Heavy-Duty Cutters
Top Knife for Universal & Clinton Heavy-Duty Cutters, 2-1/2"
Item Number: 10422
Top Knife for Universal & Clinton Heavy-Duty Cutters, 2-1/2"