| < Track Sections | FRS100/200 Home | Plug-In Jacks > |
Track Accessories & Hangers
Electro-Rail Coupling Set for FRS100 & FRS200 Series
Item Number: 12281
Coupling set for FRS100 & FRS200 Series. Side plates with cover for coupling adjacent straight track sections. Provided with Bus Bar Connectors. One coupling is required for every two sections of track joined.
Electro-Rail Dead End Cap for FRS100 & FRS200 Series
Item Number: 12286
Dead end cap for FRS100 & FRS200 Series. For closing the end of a straight track run. Similar to coupling FRS-102 with the addition of removable end insulator, end plate and bumper.
Electro-Rail Center Feed Set – 3 Pole, 60 Amp
Item Number: 12282
Center feed set for FRS100 & FRS200 Series. For electrical connection to the power supply between adjoining straight track sections. Also serves as a track coupling.
Electro-Rail End Feed Set – 3 Pole, 60 Amp
Item Number: 12285
End feed set for FRS100 & FRS200 Series. For electrical connection to the power supply and closing the end of a straight track run.
Electro-Rail Junction Box for FRS100 and FRS200 Series
Item Number: 12288
Used with center or end feed set for electrical connection to the power supply. Box has 1" and 1-1/2" knockouts on three sides.
Electro-Rail Low Level End Feed – 3 Pole, 60 Amp
Item Number: 12225
Low-level end feed for FRS100 & FRS200 Series. For electrical connection to the power supply and closing the end of a straight track run where insufficient head room exists for use of the FRS-106 end feed. Junction box has 1" and 1-1/4" knockouts on three sides.
Electro-Rail Clevis Support for Tie Rod Installations
Item Number: 12283
Clevis support for tie rod applications. Malleable iron, with 3/8" cross bolt and 3/8"-16 tapped hole for tie rod. Must be used in conjunction with FRS-124 and FRS-105 track hangers.
Electro-Rail Duplex Busway Hanger Set
Item Number: 11675
Duplex busway hanger set. For FRS100 & FRS200 Series, also FRS300 Plug-In Series. For 10' support spacing to be used at track joint over coupling.
Electro-Rail Tie Rod Hanger
Item Number: 12291
Track hanger for tie rod. Fits FRS100 & FRS200 Series, also FRS300 Plug-In Series. Allows direct attachment of 3/8" tie rods at any point between track joints. Permits easy leveling of track sections. When used with curved track, field notching of track top flange is required for clearance of clamping bolt. A minimum of two track hangers required for each straight track section.
Electro-Rail Straight Track Hanger
Item Number: 12284
Track hanger for FRS100 & FRS200 Series, also FRS300 Plug-In Series. For mounting straight track sections. Mounting hole will take 3/8" diameter bolt. They can be attached to straight track at any point between track joints. Not suitable for curved track sections. Minimum of two track hangers required for each straight track section.
Electro-Rail Low-Level Track Hanger
Item Number: 12363
Hanger (low level). For FRS100 & FRS200 Series, also FRS300 Plug-In Series. Used in place of track hanger FRS-105 where head room is limited. Takes 3/8" diameter bolts. Can be attached to straight track at any point between track joints. Not suitable for curved track. Minimum of two track hangers required for each straight track section.