Feedrail 10' Sectionalizing Track with Door - 3 Pole, 100 Amp

Sectionalizing Track sections isolate portions of a track run. They are the same as Plain Track sections except at the center of the track each bus bar is interrupted by an air gap. The bus bars are so formed and positioned by a special insulator that all trolleys smoothly cross the air gap while maintaining electrical continuity. The circuits on both sides of the gap are momentarily tied together through the trolley contacts as the trolley passses the air gap.

Special sectionalizing Track sections are made that do interrupt the current to the trolley. When used, there require two electrically connected trolleys to maintain current through the trolley at all times. They must not be used as a circuit interrupting device.

Item: Sectionalizing track with trolley door
For: FR100 Series (Feedrail(R) '100')
Amps: 100
Poles: 3
Length: 10'

Continuous Rating: 100 Amperes - 600 Volts A.C. - 250 Volts D.C.
Intermittent Rating: 150 Amperes - 600 Volts A.C. - 250 Volts D.C. (1 minute off, 1 minute on) 

Note: 10 feet is standard length. Shorter lengths furnished on special order; miniumum length 20 inches.
Note: Sections complete with bus bars.

Specifications

For:

FR100 Series Trolley Service

Length:

10'

Amps:

100

Poles:

3

Note:

10 feet is standard length. Shorter lengths furnished on special order; miniumum length 20 inches., Sections complete with Bus Bars.

Fits:

FR100 Series Trolley Service