Trolley & Busway Electrification Systems

Item Number: TBS4010

Styles: TROLLEYBAR

10 foot 100 amp four-bar housing only. Complete with one SP-1 splice plate and insulator sleeves.

Item Number: TBS100

Styles: TROLLEY BAR

100-amp copper conductor for Trolleybar systems. Sold by the foot.

Item Number: TBSCG

Styles: TROLLEY BAR

100-amp copper grounding conductor for Trolleybar systems. Sold by the foot.

Item Number: FH2103

Styles: U05788A

Heavy gauge steel box furnished with positive pressure type solderless connections, for making electrical connections to the power supply between any two adjoining track sections. 3 pole, 225 amp.

Item Number: FH5102

Styles: FH5102

Feedrail FH Series heavy duty coupling set. Includes two heavy duty gauge steel plates and cover assembled with screws, which cover track sections and cover the joint. 3 pole, 500 amp.

Item Number: FH3102

Styles: FH3102

Feedrail FH Series heavy duty coupling set. Includes two heavy duty gauge steel plates and cover assembled with screws, which cover track sections and cover the joint. 3 pole, 375 amp.

Item Number: 12282

Styles: ERS-103

Center feed set for FRS100 & FRS200 Series. For electrical connection to the power supply between adjoining straight track sections. Also serves as a track coupling.

Item Number: 12283

Styles: ER105

Clevis support for tie rod applications. Malleable iron, with 3/8" cross bolt and 3/8"-16 tapped hole for tie rod. Must be used in conjunction with FRS-124 and FRS-105 track hangers.

Item Number: 11676

Styles: ERS402-4

4 pole, 50 amp coupling set for FRS300 Plug-In Series. Consists of side plates, cover and bus bar connectors used to join track sections. One coupling is required for every two sections of track joined.

Item Number: 12281

Styles: ERS-102

Coupling set for FRS100 & FRS200 Series. Side plates with cover for coupling adjacent straight track sections. Provided with Bus Bar Connectors. One coupling is required for every two sections of track joined.

Item Number: 11679

Styles: ERS307-4

4 pole end cap for FRS300 Plug-In Series. Used for closing the end of a track run.

Item Number: 12286

Styles: ERS-107

Dead end cap for FRS100 & FRS200 Series. For closing the end of a straight track run. Similar to coupling FRS-102 with the addition of removable end insulator, end plate and bumper.

Item Number: 11675

Styles: ERS-124

Duplex busway hanger set. For FRS100 & FRS200 Series, also FRS300 Plug-In Series. For 10' support spacing to be used at track joint over coupling.

Item Number: 12285

Styles: ERS-106

End feed set for FRS100 & FRS200 Series. For electrical connection to the power supply and closing the end of a straight track run.

Item Number: 11678

Styles: ERS306-4

50 amp, 4 pole end feed. Used for connection to power supply at the end of track run. Serves as end cover. Concentric knockouts at end (1/2 or 3/4 conduit). Terminals included accomodate No. 14 to No. 6 strand wire. Fits FRS300 Plug-In Series.

Item Number: 12288

Styles: ERS-110

Used with center or end feed set for electrical connection to the power supply. Box has 1" and 1-1/2" knockouts on three sides.

Item Number: 12225

Styles: ERS-149

Low-level end feed for FRS100 & FRS200 Series. For electrical connection to the power supply and closing the end of a straight track run where insufficient head room exists for use of the FRS-106 end feed. Junction box has 1" and 1-1/4" knockouts on three sides.

Item Number: 12363

Styles: ERS-115

Hanger (low level). For FRS100 & FRS200 Series, also FRS300 Plug-In Series. Used in place of track hanger FRS-105 where head room is limited. Takes 3/8" diameter bolts. Can be attached to straight track at any point between track joints. Not suitable for curved track. Minimum of two track hangers required for each straight track section.

Item Number: 12284

Styles: ERS-105

Track hanger for FRS100 & FRS200 Series, also FRS300 Plug-In Series. For mounting straight track sections. Mounting hole will take 3/8" diameter bolt. They can be attached to straight track at any point between track joints. Not suitable for curved track sections. Minimum of two track hangers required for each straight track section.

Item Number: 12291

Styles: ERS-150

Track hanger for tie rod. Fits FRS100 & FRS200 Series, also FRS300 Plug-In Series. Allows direct attachment of 3/8" tie rods at any point between track joints. Permits easy leveling of track sections. When used with curved track, field notching of track top flange is required for clearance of clamping bolt. A minimum of two track hangers required for each straight track section.

Item Number: FR140

Styles: S00186P

Heavy gauge pressed steel plates for intermediate mounting of track sections to supporting members. Fits over top of straight track housing rib at any of the insulator bolting points. Complete with 3/8" mounting bolt.

Item Number: FR103

Styles: U00213P

Set of two heavy gauge pressed steel plates, box and covers, through which electrical connection to the power supply is made between any two track sections. Serves as a track coupling and hanger for attaching supporting members. Has concentric knockouts for 3/4", 1", 1-1/4" or 1-1/2" conduit in the top. complete with pressure type terminals accommodating No. 14 to 0 stranded wire.

Item Number: FR102

Styles: U10318

Set of two heavy gauge pressed steel plates serves as a coupling for track sections and as a hanger for attaching to supporting members. Removable snap on covers permit ready access to the bus bar joints.

Item Number: FR107

Styles: U00278

Set of two heavy gauge pressed steel plates and box for closing the end of a track run. Also serves as a hanger fo attaching to supporting members. Include a trolly stop.

Item Number: FH3103

Styles: U05788C

Heavy gauge steel box furnished with positive pressure type solderless connections, for making electrical connections to the power supply between any two adjoining track sections. 3 pole, 375 amp.

Item Number: FH5103

Styles: FH5103

Heavy gauge steel box furnished with positive pressure type solderless connections, for making electrical connections to the power supply between any two adjoining track sections. 3 pole, 500 amp.

Item Number: FH2102

Styles: FH2102

Feedrail FH Series heavy duty coupling set. Includes two heavy duty gauge steel plates and cover assembled with screws, which cover track sections and cover the joint. 3 pole, 225 amp.

Item Number: FH2107

Styles: T05646

Feedrail FH Series heavy duty dead end cap.

Item Number: FH2108

Styles: FH2108

Heavy gauge steel box furnished with positive pressure type solderless connections, for making electrical connectinos to the power supply at the end of a track run. 3 pole, 225 amp.

Item Number: FH3108

Styles: FH3108

Heavy gauge steel box furnished with positive pressure type solderless connections, for making electrical connectinos to the power supply at the end of a track run. 3 pole, 375 amp.

Item Number: FH2115

Styles: U03963

These hangers are made up of pre-formed heavy gauge steel straps for supporting track sections. Two hanger sets are required for each track section to provide support every five feet.

Item Number: FX102

Styles: U22967A

Set of two heavy gauge pressed steel plates serves as a coupling for all straight track sections. Set includes bus bar connectors. One Coupling Set required with each track joint, order separately.

Item Number: FR109

Styles: U13809P

Set of two heavy gauge pressed steel plates and a two piece box through which electrical connection to the power supply can be made at the end of a track run. Reversible box permits conduit connection at top, bottom of end. Has concentric knockouts for 3/4", 1', 1-1/4" or 1-1/2" conduit. Also serves as a hanger for attaching track to supporting members. Complete with pressure type terminals accommodating No. 14 to 0 stranded wire.

Item Number: FX199

Styles: S22872

Heavy gauge steel for intermediate support of track from rods. 7/16"Dia. hole in top takes 3/8" rod.

Item Number: FR124

Styles: U03543

Set of two heavy gauge pressed steel plates formed to match flared ends of transfer sections. Use as hanger for attaching to supporting mebers at open end of transfer track sections.

Item Number: FX507

Styles: T22949

Heavy gauge pressed steel box for enclosing the end of track run. Includes a trolley stop and end insulator. For 300 volt systems.

Item Number: TBS100ST

Styles: TROLLEY BAR

Conductor straightening tool, 100-amp. Straightens copper conductors for easy installation.

Item Number: 13334F

Styles: TROLLEY BAR

Trolleybar 100 Amp Straightening Fixture Frame

Item Number: 13394

Styles: HB-2

Fixed hanger, 2" length with 5/16" threaded stud.

Item Number: TBSRMH

Styles: TROLLEYBAR

Rod mount hanger for Trolleybar systems, with 3/8" threads.

Item Number: TBSSP

Styles: TROLLEYBAR

Splice plate for Trolleybar systems.

Item Number: TBSTB

Styles: TBSTB

Threaded bracket for Trolleybar table leg mounting, 3/8 inch threads.

Item Number: TBSEC

Styles: EC-4

4-conductor end cap for Trolleybar systems. Used at end of conductor run with end piece.

Item Number: TBSEP

Styles: TROLLEYBAR

4-conductor end piece for Trolleybar systems. Installed at the end of every conductor run to insulate conductor.

Item Number: 11677

Styles: ERS354M

Fusible plug-in jack w/box and cable clamp. For FRS300 Plug-In Series. 4 poles, 15 amps, 300 volts AC. Fuses are not included. Fusible with 9/16" x 2" cartridge fuses.

Item Number: 17742

Styles: ERS-61P

Fusible with cabinet and fuse block. 3 poles, 15 amps, 250 volts AC. Steel hinged door cabinet. Takes 9/16" x 2" long cartridge fuses. Includes cartridge fuse block and cable support lug.

Item Number: 11681

Styles: ERS355C

Fusible plug-in jack w/cabinet and NEMA 5-15R (straight blade) receptacle. For FRS300 Plug-In Seies. 2 pole, 15 amps, 120 volts AC. Fuses are not included. Fusible with 9/16" x 2" cartridge fuses.

Item Number: 12241

Styles: ERS-42P

Fusible with cabinet, fuse block and NEMA type 5-15R receptacle. 2 poles, 15 amps, 125 volts AC.

Item Number: 11470

Styles: ERS350M

Non-fusible plug in jack with 6" leads. For FRS300 Plug-In Series. 4 poles, 15 amps, 300 volts AC.

Item Number: 11472

Styles: ERS351M

Non-fusible plug in jack w/box and cable grip. For FRS300 Plug-In Series. 4 pole, 15 amp, 300 Volts AC.