Sewing Machine Motors, Accessories & Oil
Since 1956, Universal Sewing Supply has been a premier provider of top-tier sewing machine parts, accessories, and premium machine oil. With over half a century of experience, our company has continuously strived for excellence, offering a comprehensive range of high-quality accessories meticulously designed to elevate sewing machine performance. From precision needles to durable bobbins and everything in between, our products are crafted to meet the diverse needs of professionals and hobbyists alike. Our signature sewing machine oil, formulated with precision and care, ensures optimal lubrication for smooth operation and prolonged machine lifespan. Universal Sewing Supply has earned the trust of generations with our unwavering commitment to quality, reliability, and customer satisfaction. If you are unable to find what you are looking for, please contact our sales department.
Enduro Continuous-Run Motor, 1/2 Horsepower, 220 Volt, 3 Phase, 1725 RPM
Item Number: 57417
Continuous Run Motor for Buttonsewer, Buttonholer and Bartacker Machines. Precision balance for smooth quiet performance. Fan ventilated for cooler running. Built-in belt tightener adjustable for correct belt tension. Enclosed OSHA type belt guard for safety; fully adjustable. Oversize ball bearings pre-lubricated and permanently sealed. 6 volt light tap for low voltage light fixture. 2/5 H.P., 220 Volt, 3-Phase, 1725 RPM. Complete with pulley.
Plastic See-Through Thread Lubricating Box
Item Number: 56583
Plastic thread lubricating box. Designed with permanent tank reservoir which assures a visible source of thread lubricant and does not evaporate because of a sure seal cap. Thread passes through felts which saturates thread with lubricant. Fastens to machine with a powerful magnet or #6-40 screw. Thumb screw is recommended for mounting and must be ordered separately.
#210 Right Compensating Narrow Presser Foot, 1/32 Inch
Item Number: 15284
This right compensating presser foot is a narrow (1/32") foot for avoiding attachments like buttons or zippers.
#211 Right Compensating Narrow Presser Foot, 1/16 Inch
Item Number: 15294
The 211 right compensating presser foot is a 1/16" right foot that compensates for fabric variation and feed. It can be used to create an even stitch along the material's edge. The right-side foot guides the garment to stitch on an even edge to the right side of the sewing needle.
#211-1 Right Compensating Presser Foot
Item Number: 15296
Style 211-1 right compensating presser foot.
#211-14 Dual Compensating Presser Foot with Strip Gauge
Item Number: 15300
The 211-14 style presser foot is a dual compensating foot that allows the operator to obtain two different stitching margins without changing the presser foot. It can substitute a 3/16” double needle seam and has a strip gauge that is compatible with Juki DDL models.
#212 Right Compensating Presser Foot, 1/8 Inch
Item Number: 15306
The Style 212 Right Compensating Presser Foot is a 1/8” presser foot engineered to accommodate fabric inconsistencies and feeding variations. Featuring a spring-loaded design, this presser foot includes a right-side edge guide for precise stitching.
#213 Right Compensating Presser Foot, 3/16 Inch
Item Number: 15314
The 213 Right Compensating Foot is a 3/16" presser foot tailored for industrial sewing machines and compatible with most single needle lockstitch machines. Ideal for both top stitching and edge stitching applications.
#214 Right Compensating Presser Foot, 1/4 Inch
Item Number: 15319
The 214 Right Compensating Presser Foot is a 1/4" sewing machine foot designed to produce uniform stitches along the material's edge. Suitable for top stitching or edge stitching tasks on most single needle lockstitch machines.
#221 Left Compensating Narrow Presser Foot, 1/16 Inch
Item Number: 15382
The 221 Left Compensating Presser Foot is a 1/16 in left-side foot used to create an even stitch along the edge of sewn material. It is designed to go over different thicknesses of fabric.
#222 Left Compensating Presser Foot, 1/8 Inch
Item Number: 15388
The Style 222 Left Compensating Presser Foot, measuring 1/8 inch, is designed to handle fabric irregularities and feeding discrepancies. Equipped with a spring-loaded mechanism, this presser foot is complemented by a left-side edge guide, ensuring accuracy in stitching.
#224 Left Compensating Presser Foot, 1/4 Inch
Item Number: 15396
A 224 left compensating foot is a 1/4 inch foot used for sewing machines to create an even stitch along the edge of material. It can be used for top stitching or edge stitching on most single needle lockstitch machines.
#231 Double Compensating Presser Foot
Item Number: 15352
The 231 Double Compensating Foot is a sewing machine foot that is used for uniform and precise top stitching. It can be used for both right and left top stitching and has a spring loaded edge guide that can compensate for different fabric thicknesses.
#3706 Left Compensating Zig-Zag Foot With Adjustable Margin
Item Number: 94259
Left zig-zag compensating foot for Singer and Juki zigzag machines.
#521-Z Left Compensating Presser Foot, 1/16 Inch
Item Number: 15422
Style 521-Z left compensating presser foot, 1/16 inch.
#602 Compensating Binder Foot
Item Number: 61312
Specialized high shank compensating binder presser foot for industrial single-needle drop stitch machines. Smooth fabric alignment, eliminates puckering, speeds up feeding, hemming, folding. For use with 1" or 1-1/8" binding. Enhances efficiency in sewing projects like dresses, sportswear, overcoats, etc. Includes foot, feed, plate, binder.
#604 Compensating Binder Foot
Item Number: 61313
The #604 Compensating Binder Foot is ideal for industrial single-needle drop stitch machines. Compatible with 1-1/4”+ binding, it smooths fabric, prevents puckering, and enables faster feeding, hemming, and folding.
#D23 Double Compensating Presser Foot
Item Number: 15338
The D23 is a 1/32" double compensating presser foot that is used for precise top stitching. It can be used for both right and left top stitching. The foot is also known as the CD-1/32 (D23) compensating presser foot.
#D231 Compensating Presser Foot, 1/16 Inch
Item Number: 15354
The D231 1/16 inch compensating presser foot is a double compensating foot that can be used for both right and left top stitching. It has a spring loaded edge guide that can compensate for different fabric thicknesses.
#D232 Compensating Presser Foot, 1/8 Inch
Item Number: 15357
The D232 compensating presser foot, 1/8 inch, suits industrial sewing machines. It adjusts for varying fabric thicknesses. Its large toe rests on feed dogs, accommodating thick fabrics, aiding in sewing tasks like attaching webbing to fabric.
3-Corner Seam Gauge for Industrial & Domestic Sewing Machines
Item Number: 5813
Help keep stitches uniformaly spaced for different seem widths and patterns. Allows for different seam widths and patterns by turning the gauge on its mounting screw and moving the position to the desired clearance.
Clean Finish Lockstitch Swing Hemmer, 1/2 Inch
Item Number: 51096
1/2 inch lockstitch swing hemmer for hemming all kinds of wearing apparel; also curtains and draperies. Operator can swing hemmer away from the foot for finishing the bottom hem of a closed garment.
Clean Finish Lockstitch Swing Hemmer, 1/4 Inch
Item Number: 51094
1/4 inch lockstitch swing hemmer for hemming all kinds of wearing apparel; also curtains and draperies. Operator can swing hemmer away from the foot for finishing the bottom hem of a closed garment.
Clean Finish Lockstitch Swing Hemmer, 1-1/2 Inch
Item Number: 5251
1-1/2 inch lockstitch swing hemmer for hemming all kinds of wearing apparel; also curtains and draperies. Operator can swing hemmer away from the foot for finishing the bottom hem of a closed garment.
Clean Finish Lockstitch Swing Hemmer, 3/4 Inch
Item Number: 5248
3/4 inch lockstitch swing hemmer for hemming all kinds of wearing apparel; also curtains and draperies. Operator can swing hemmer away from the foot for finishing the bottom hem of a closed garment.
Clean Finish Lockstitch Swing Hemmer, 3/8 Inch
Item Number: 51095
3/8 inch lockstitch swing hemmer for hemming all kinds of wearing apparel; also curtains and draperies. Operator can swing hemmer away from the foot for finishing the bottom hem of a closed garment.
Clean Finish Swing Hemmer, 1/2 Inch
Item Number: 19495
The 1/2" clean edge swing hemmer is used for hemming straight runs on all types of apparel, curtains, draperies and more. Operator can swing hemmer away from the foot for finishing the bottom hem of a closed garment. This attachment is similar to standard double fold hemmer except that this hemmer is adjustable to and from the presser foot.
Clean Finish Swing Hemmer, 1/4 Inch
Item Number: 19467
The 1/4" clean edge swing hemmer is used for hemming straight runs on all types of apparel, curtains, draperies and more. Operator can swing hemmer away from the foot for finishing the bottom hem of a closed garment. This attachment is similar to standard double fold hemmer except that this hemmer is adjustable to and from the presser foot.
Clean Finish Swing Hemmer, 3/4 Inch
Item Number: 19468
The 3/4" clean edge swing hemmer is used for hemming straight runs on all types of apparel, curtains, draperies and more. Operator can swing hemmer away from the foot for finishing the bottom hem of a closed garment. This attachment is similar to standard double fold hemmer except that this hemmer is adjustable to and from the presser foot.
Clean Finish Swing Hemmer, 3/8 Inch
Item Number: 19494
The 3/8" clean edge swing hemmer is used for hemming straight runs on all types of apparel, curtains, draperies and more. Operator can swing hemmer away from the foot for finishing the bottom hem of a closed garment. This attachment is similar to standard double fold hemmer except that this hemmer is adjustable to and from the presser foot.
Consew Electric Brushless Industrial Sewing Machine Servo Motor (Consew CSM1000)
Item Number: CSM1000
The Consew CSM1000 Industrial Sewing Machine Motor is highly efficient, saving up to 70% electricity. With 3/4HP and 550W power, it suits various sewing tasks, from light to heavy-duty. Compatible with a range of machines, it ensures reliable performance throughout.
Consew Electric Brushless Industrial Sewing Machine Servo Motor with Needle Positioner (Consew CSM1001)
Item Number: CSM1001
The Consew CSM1001 Industrial Sewing Machine Motor is highly energy-efficient, saving up to 70% electricity. With 3/4HP power and 550 Watts output, it suits various sewing tasks, from light to heavy-duty. Compatible with different sewing machines, it offers reliable performance and includes a needle positioner, unlike the CSM1000.
Consew Heavy Duty Brushless Industrial Sewing Machine Servo Motor (Consew CSM3000)
Item Number: CSM3000
The Consew CSM3000 Electric Brushless Servo Motor is an energy-efficient powerhouse for industrial sewing machines, saving up to 70% electricity. With 1HP and 750 Watts, it handles light to heavy-duty tasks seamlessly across various machine types, ensuring efficient and powerful sewing operations.
Double Fold Binder, 1-1/2 Inch
Item Number: 50486
This 1-1/2" simple double-fold binder is designed to effortlessly attach bias tape or binding to the edge of fabric, ensuring added durability and protection. It smoothly folds the tape in half around the fabric, neatly concealing the top and bottom edges of the tape for a refined finish.
Double Fold Binder, 1-1/4 Inch
Item Number: 5321
This 1-1/4 inch plain double-fold binder effortlessly attaches bias tape or binding to the fabric's edge, augmenting its resilience and safeguarding. It smoothly folds the tape in half around the fabric, expertly concealing the top and bottom edges for a refined finish.
Double Fold Binder, 1-3/4 Inch
Item Number: 59921
This 1-3/4" plain double fold binder serves the purpose of seamlessly attaching bias tape or binding to the fabric's edge, enhancing its durability and protection. This binder effortlessly folds the tape in half around the fabric, while neatly tucking the top and bottom edges of the tape underneath for a polished appearance.
Double Fold Binder, 2 Inch
Item Number: 59922
This plain double fold binder seamlessly attaches bias tape or binding to fabric edges, enhancing durability and protection. This binder effortlessly folds the tape in half around the fabric, neatly tucking the top and bottom edges underneath for a polished appearance.
Enduro 100 Watt Sewing Machine Motor with Foot Pedal & Belt for Home Sewing Machines, Black
Item Number: HM100
The Enduro HM100 sewing motor, with copper windings and a commutator, offers durable performance. Operating at 110V, 100W, and 6000 RPM, it fits most domestic machines with its heavy-duty mount. The kit includes a foot pedal, belt, and replacement carbon brush set for convenience. Color: black.
Enduro 100 Watt Sewing Machine Motor with Foot Pedal & Belt for Home Sewing Machines, White
Item Number: HM100W
The Enduro HM100 sewing motor, with copper windings and a commutator, offers durable performance. Operating at 110V, 100W, and 6000 RPM, it fits most domestic machines with its heavy-duty mount. The kit includes a foot pedal, belt, and replacement carbon brush set for convenience. Color: white.
Enduro 550 Watt Electric Sewing Machine Servo Motor (Enduro EM550)
Item Number: SM550
The Enduro SM-550 Industrial Sewing Machine Servo Motor offers high-torque performance with 3/4 HP, 550W power, and clutchless operation. Adjustable speed knob ensures ease of use, while its energy efficiency saves costs. Kit includes all necessary components for easy installation and quiet, reliable operation.
Enduro 6 Foot Power Cord, 2-Prong, 110-Volt AC, UL Certified
Item Number: 6915
The Enduro 110V AC cord fits Brother, Singer, White, Baby-Lock, Viking, Pfaff sewing machines. B-style plug (15x5x17mm), US 110V outlets compatible. UL Listed for safety, certified by Underwriters Laboratories.
Enduro Clutch Motor, 1/2 Horsepower, 115 Volt, Single Phase, 1750 RPM
Item Number: 9623
MOTOR 1/2HP 115V 1750RPM 1P
Enduro Variable Speed Sewing Machine Foot Pedal, Style 359102
Item Number: 6988
The foot-operated speed control pedal is compatible with various portable electric sewing machines. Check the plug before buying: it must match the second photo. The plug end is 1.25" wide, 3/8" tall, with three evenly spaced terminal plugs. The 52" cord to the machine and 76" to the wall outlet provide flexibility. Standard Type-A 110V plug.
Enduro Variable Speed Sewing Machine Foot Pedal, Style 419451
Item Number: 6933
Foot operated speed control pedal fits many portable electric sewing machines. Check plug compatibility. Rectangular plug, 1 3/16" wide, 3/8" tall, with three terminals. Cord length: 48" to machine, 72" to 110V wall plug. Standard Type-A, 110V North American plug.
Enduro Variable Speed Sewing Machine Foot Pedal, Style 4C-333BL
Item Number: 6966
The Enduro style 4C-333BL foot pedal offers foot-operated speed control for various portable electric sewing machines. Ensure plug compatibility before purchase. It features a male single-pole plug, approximately 1" in depth and height. No separate power cord; power is supplied through the connection to the motor.
Enduro Variable Speed Sewing Machine Foot Pedal, Style 979314
Item Number: 6922
Foot-operated speed control pedal fits various portable electric sewing machines; verify plug compatibility before purchase. Features a 1" wide, 5/8" tall plug with three terminals, and a 57" cord to the machine and 76" to the 110V wall plug, which is a standard Type-A, 2-prong North American style.
Enduro Variable Speed Sewing Machine Foot Pedal, Style J00360051
Item Number: 6977
Foot-operated speed control pedal for electric sewing machines. Check plug compatibility. Rectangular shape, 1 1/4" wide, 3/8" tall, with three terminal plugs. 50" cord to machine, 82" to 110V wall plug, standard Type-A, 2-prong North American style.
Enduro Variable Speed Sewing Machine Foot Pedal, Style PFW196131
Item Number: 6911
Foot-operated speed control pedal fits various portable electric sewing machines. Check plug compatibility before purchase! Plug end is curved oval, 1 3/4" wide and 3/4" tall, with three evenly spaced terminal plugs. Cord length: 51" to machine, 76" to 110V wall plug (Type-A, 2-prong).
Grip Snip Y-Type Thread Cutter with Exposed Knife
Item Number: 8577
This versatile device catches and cuts thread for various sewing tasks seamlessly. Attached easily to the presser foot bar, it doesn't disrupt regular sewing but stands ready when required. With a spring to hold the thread and a sharp blade for instant cutting, it eliminates needle rethreading, thread bunching, and the need for scissors. Resulting in reduced thread waste, fewer needle breakages, and lower labor costs.