Labor Saving Devices

Item Number: 5808

Styles: BT100

Belt and Tie Turner for all types of turning operations on garments of all kinds, as well as a pocketbook or other like articles. Simple to operate. Just insert appropriate tube size, slip the item on the tube, move handle down and release rod. Rod goes back to starting position and is ready for the next item. Installation just requires attaching to table or other convenient location with screws or bolts. Comes complete with 7 tubes with steel collars; sizes 3/8" (1), 1/2" (2), 5/8" (2) and 3/4" (2).

Item Number: 6944

Styles: CT1

For pointing and turning of collars, cuffs, straps, etc. Top needle tip (spring loaded) prevents damaging the lightest of materials.

Item Number: 13916

Styles: 780U-10

Reel tilts to any angle and can be used in any position (vertically or horizontally). Ball bearings help eliminate drag. Special brake eliminates binding overrun when machine stops. Complete with mounting clamp.

Item Number: 13929

Styles: 780U1-1224

Ball bearing delivers binding freely and brake prevents spinning. Reel may be positioned overhead, under table, or in any other position on table. Reel can be tilted to any angle. Made in U.S.A.

Item Number: 96396

Styles: TR105

The Universal 8" Tape & Ribbon Binding Reel offers versatility with its tilting design for any angle or position, smooth ball bearings to reduce drag, and a special brake to prevent binding over-run. Comes with a mounting clamp for easy setup.

Item Number: 4618

Styles: TFU16-3 RACING

High quality electronic metering device provides accurate feeding of elastic for perfect fit. 70mm (2-3/4") roller width accommodates most elastics. Complete with mounting base. 110 Volt.

Item Number: 13932

Styles: 781-1-1024

Complete with ball bearing hubs, knobs & special brake to eliminate binding overruns. 3/8" Bore.

Item Number: 13935

Styles: 781-1-1224

Complete with ball bearing hubs, knobs & special brake to eliminate binding overruns. 3/8" Bore.

Item Number: 13327

Styles: 781-1-0824

Complete with ball bearing hubs, knobs & special brake to eliminate binding overruns. 3/8" Bore.

Item Number: 13326

Styles: 2510 BLACK

Bar Knob for Friction Discs, 1/4-20 x3/4" Stud

Item Number: 5404

Styles: S286

For stretching elastics and strip rubber in elasticized items or for retarding tapes and laces in order to create shirring or fullness. Tensions are generally used in conjuction with some form of folding attachment (foot or guide). Double spring construction for equalized tension. Table type fastens to either top, front or underside of the machine table. Adjustable to any width up to 2-1/2". Built-in separating clips convert tension into tape guide.

Item Number: 53106

Styles: TR205

Spring Collar Assembly for Tape Racks with 3/8" Bore

Item Number: 52771

Styles: F226D

Cone Bearing, 1-1/4" Bore

Item Number: 58210

Styles: CB4

Cone Bearing, 2-1/4" OD, 1/2" Bore

Item Number: 52765

Styles: F226B

Cone Bearing, 3/4" Bore

Item Number: 58208

Styles: CB2

Cone Bearing, Stubby, 1-1/2" OD, 3/8" Bore

Item Number: 13325

Styles: .

Deluxe Rod Clamp Assembly, 1/2" x 1/2" Cross Clamp

Item Number: 13310

Styles: .

Deluxe Rod Clamp Assembly, 3/8" x 3/8" Cross Clamp

Item Number: 11856

Styles: V1008

Black Oxide Steel Rods, 1/2" x 20"

Item Number: 66618

Styles: .

Black Oxide Steel Rods, 1/2" x 30"

Item Number: 13336

Styles: .

Black Oxide Steel Rods, 3/8" x 12"

Item Number: 59960

Styles: S299

Heavy-Duty C-Clamp Assembly, 1/2" Bore

Item Number: 50438

Styles: PR33

3" Knurled Roller for Pullers, 1/2" Bore

Item Number: 50439

Styles: PR32

3" Rubber Roller for Pullers, 1/2" Bore

Item Number: 13260

Styles: 35407022

3-Piece type. Order TWO Bodies (ends) of the same HP rating with desired bore and ONE Spider (center) of the same HP rating for complete coupling.

Item Number: 13259

Styles: 35407014

3-Piece type. Order TWO Bodies (ends) of the same HP rating with desired bore and ONE Spider (center) of the same HP rating for complete coupling.

Item Number: 2745

Styles: 35407097

3-Piece type. Order TWO Bodies (ends) of the same HP rating with desired bore and ONE Spider (center) of the same HP rating for complete coupling.

Item Number: 1797

Styles: LC-50

Machined Steel Shaft Collar, 1/2" ID, 7/8" OD, 3/8" Width

Item Number: 50075

Styles: P-1

Equipped with 3” stainless steel rollers (1 knurled and 1 smooth). Black painted aluminum mechanism cover eliminates thread wrapping around gears and pulley. Black painted base made of heavy duty cast iron. Standard model used on machines such as Singer 112, 212, 281; Union Special, etc.

Item Number: 11689

Styles: 205NSA-KS 2 1/2

The Heavy-Duty Air Operated Tape Cutter uses 40 p.s.i. air pressure for precise cutting of tape and elastic. It features a double-acting cylinder, easy hinge mounting, knee-operated air switch, replaceable blades, blade guard, and includes all necessary accessories. Optional Filter Regulator Kit No. 16308 recommended.

Item Number: 11955

Styles: 205NSA-KS-3"

The Heavy-Duty Air Operated Tape Cutter uses 40 p.s.i. air pressure for precise cutting of tape and elastic. It features a double-acting cylinder, easy hinge mounting, knee-operated air switch, replaceable blades, blade guard, and includes all necessary accessories. Optional Filter Regulator Kit No. 16308 recommended.

Item Number: 11707

Styles: 205NSA-KS 4"

The Heavy-Duty Air Operated Tape Cutter uses 40 p.s.i. air pressure for precise cutting of tape and elastic. It features a double-acting cylinder, easy hinge mounting, knee-operated air switch, replaceable blades, blade guard, and includes all necessary accessories. Optional Filter Regulator Kit No. 16308 recommended.

Item Number: 16308

Styles: .

1/8" & 1/4" Filter/Regulator combination complete with automatic drain. For use with air cylinders. 1/8" comes with 3 feet of 1/4" O.D. poly hose, 1/4" tube X 1/8" male pipe fitting for line connection. 1/4" comes with 5 feet of 3/8" O.D. poly hose, 3/8" tube X 1/4" male pipe fitting for line connection and coupling for quick disconnect. Mounting bracket with screws also included.

Item Number: 18541

Styles: MJV-4

The MJV/MJVO series are high flow 1/8" NPT ported 2-Way, 3-Way and 4-Way valves that change their flow path when the stem is either depressed or released (spring return). The 2-Way and 3-Way valves are offered in both Normally-Closed and Normally-Open versions.

Item Number: 18406

Styles: 28-4-2

Double-Barb Brass Fittings permit fast, sure connections of thermo-plastic tubing (polyethylene). One-piece, push-on design features a barbed lip that rings the tip of the insert. Safe, positive, leak-proof connections that won't shake loose, won't pull out, won't pop off when Barb Fittings are used within the normal pressure and temperature ranges of tubing used.

Item Number: 18410

Styles: 229-4-2

Double-Barb Brass Fittings permit fast, sure connections of thermo-plastic tubing (polyethylene). One-piece, push-on design features a barbed lip that rings the tip of the insert. Safe, positive, leak-proof connections that won't shake loose, won't pull out, won't pop off when Barb Fittings are used within the normal pressure and temperature ranges of tubing used.

Item Number: 18407

Styles: 28-4-4

Double-Barb Brass Fittings permit fast, sure connections of thermo-plastic tubing (polyethylene). One-piece, push-on design features a barbed lip that rings the tip of the insert. Safe, positive, leak-proof connections that won't shake loose, won't pull out, won't pop off when Barb Fittings are used within the normal pressure and temperature ranges of tubing used.

Item Number: 16986

Styles: AAF-63

Short Brass Coupling, #10-32

Item Number: 16779

Styles: AAF-61

Stud is stainless steel hex head with screwdriver slot. Complete with O-ring and gasket. Permits port to be set in any direction 360°. Secure by tightening screw stud.

Item Number: 16528

Styles: .

#10-32 x 1/2" Socket Head Cap Screw

Item Number: 18697

Styles: AAT-74

#10-32 x 3/8" Socket Head Cap Screw

Item Number: 18696

Styles: .

#10-32 x 5/8" Socket Head Cap Screw

Item Number: 18698

Styles: .

#10/32 x 1/2" Socket-Head Set Screw

Item Number: 19324

Styles: 9549

#10/32 x 3/16" Socket-Head Set Screw

Item Number: 18773

Styles: .

#14 x 1" Pan Head Phillips Machine Screw

Item Number: 12405

Styles: .

#4-40 x 1/2" Phillips Head Machine Screw

Item Number: 18700

Styles: 062660-7-12

#5-40 x 3/8" Pan Head Phillips Machine Screw

Item Number: 18729

Styles: AAT-33

#6 Flat Washer

Item Number: 16485

Styles: #6

#6 Zinc Plated Split-Lock Washer

Item Number: 18970

Styles: 01-3061-11

1/4-20 x 1/2" Button Head Socket Cap Screw

Item Number: 54457

Styles: 199

1/4-20 x 1/4" Button Head Socket Cap Screw

Item Number: 11446

Styles: .

1/4-20 x 3/4" Phillips Pan Head Machine Screw

Item Number: 18695

Styles: .

1/4-20 x 5/16" Round Head Intermediate Machine Screw, Slotted

Item Number: 18699

Styles: 350600

1/4-28 x 3/4" Socket Head Cap Lock Screw

Item Number: 12507

Styles: 01-7345-01

Acuator for Universal & Clinton Heavy-Duty Cutters

Item Number: 10523

Styles: 01-1538-04

Adjustable Knife Guard for Universal & Clinton Heavy Duty Cutters, Complete

Item Number: 10472

Styles: 01-1515-01

Adjusting Stud for Universal & Clinton Heavy-Duty Cutters

Item Number: 10683

Styles: 01-4524-31

Air Cylinder Mounting Clevis Pin, 1/4" x 1-1/2"

Item Number: 12404

Styles: 10-0783-01

Arm with Bushing for Universal & Clinton Heavy-Duty Cutters

Item Number: 18783

Styles: 1535

Base Plate for Universal & Clinton Heavy Duty Cutters

Item Number: 10012

Styles: 091P

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 16555

Styles: D-166-1

Includes clevis, nut, pin and 2 spring clips.

Item Number: 16557

Styles: D-231-1

Includes clevis, nut, pin and 2 spring clips.

Item Number: 57238

Styles: AC125

Blade for Air Operated Impact Cutters, 1 Inch

Item Number: 12645

Styles: 01-6348-02

Block Pin for Universal & Clinton Heavy-Duty Cutters

Item Number: 10454

Styles: 01-1536-11

BOTTOM KNIFE 2-1/2"

Item Number: 10393

Styles: 01-1536-21

Bottom Knife for Universal & Clinton Heavy-Duty Cutters, 3"

Item Number: 10463

Styles: 01-1536-31

Bottom Knife for Universal & Clinton Heavy-Duty Cutters, 4"

Item Number: 16608

Styles: AAF-40

Brass Tube Fitting,1/4" OD Tube, #10-32

Item Number: 19183

Styles: 1200

Bumper for Backlatching Foot Lifters

Item Number: 10289

Styles: A-95-24-1

Clippard Air Cylinder,1-1/2" Bore S/S Cylinder, Clevis Mount, Rotating Rod (Clippard CDR-24-1)

Item Number: 11069

Styles: MPA-3

Single acting, spring return, 15/32-32 female thread mounts to Clippard miniature valves and other devices, Made in U.S.A.

Item Number: 11070

Styles: MPA-3P

Single acting, spring return, 15/32-32 female thread mounts to Clippard miniature valves and other devices, Made in U.S.A.

Item Number: 10351

Styles: 30-0382-01

Compression Spring for Universal & Clinton Heavy-Duty Cutters

Item Number: 10692

Styles: 30-0887-01

Cotter Pin, 5/64" x 3/4"

Item Number: 12995

Styles: FL-10

Female L-Valve, #10-32

Item Number: 12403

Styles: 10-1011-01

Guard for Universal & Clinton Heavy-Duty Cutters, fits 2-1/2 & 3 Inch Cutters

Item Number: 13516

Styles: .

Guard for Universal & Clinton Heavy-Duty Cutters, fits 4 Inch Cutters

Item Number: 13768

Styles: NH10-32

Hex Jam Nut, 10-32

Item Number: 16561

Styles: RFL-115

Hex Jam Nut, Zinc, 1/4-28

Item Number: 17827

Styles: D9

Hex Jam Nut, Zinc, 5/8-18

Item Number: 12692

Styles: .

Hex Nut, #4-40

Item Number: 57078

Styles: SBT45

Knife for Union Special Back Tacking Attachments

Item Number: 16247

Styles: 3750X2

Male Run Tee, 1/8" Female NPTF x 1/8" Male NPTF x 1/8" Female NPTF

Item Number: 10334

Styles: 30-0381-01

Needle Bearing, 1/2" x 11/16" x 3/8"

Item Number: 12643

Styles: 01-6324-01

Pin Block for Universal & Clinton Heavy-Duty Cutters

Item Number: 13837

Styles: 7-THIN

Replacement Suction Cup for Label Dispenser, Large

Item Number: 10307

Styles: 30-0312-01

Roller Thrust Bearing Race, 1/2" Bore, 15/16" OD, 1/32" Thickness

Item Number: 10384

Styles: 30-0739-01

Screw, #10-32 x 1/2"

Item Number: 10271

Styles: 10-0391-01

Shaft Assembly for Universal & Clinton Heavy-Duty Cutters

Item Number: 12652

Styles: 01-6319-01

Shaft Collar for Universal & Clinton Heavy-Duty Cutters

Item Number: 10897

Styles: 34ASR

For Humphrey TAC, TAC2, and TAC3 Valves. Threads onto any TAC push button valve and Micro Switch (No. 2669). Air pressure applied to pilot port drives 'V' cup sealed piston to actuate valve or switch push button. Maximum pilot pressure 125 p.s.i.

Item Number: 10906

Styles: 341ASR

PILOT OPERATOR 1/8"

Item Number: 57074

Styles: SBT41

Spring for Union Special Back Tacking Attachments

Item Number: 18784

Styles: 10-0203-01

Steel Hinge, Black Oxide Finish

Item Number: 57240

Styles: AC135

Striker Plate for Air Operated Impact Cutters

Item Number: 55952

Styles: 30-0311-01

Thrust Bearing for Universal & Clinton Heavy Duty Cutters

Item Number: 10509

Styles: 01-1506-01

Top Blade Holder for Universal & Clinton Heavy-Duty Cutters

Item Number: 10422

Styles: 01-1511-11

Top Knife for Universal & Clinton Heavy-Duty Cutters, 2-1/2"