| < Track Sections | FM/FX Series Home | Trolleys > |
Track Accessories & Hangers
Feedrail End Feed Box for FM and FX Series Multi-Conductor Trolley Service - 5 Pole, 60 Amp
Item Number: FX509
Heavy gauge pressed steel Junction box and Cover through which electrical connections to the power supply can be made at the end of the track run. Has concentric knock-outs in the end for 1-3/8", 1-3/4" or 2" conduit. Terminals included accomodate No. 14 to 4 standard wire. 5 poles, 60 amps, for 300 volt system.
Feedrail End Feed Box for FM and FX Series Multi-Conductor Trolley Service - 4 Pole, 60 Amp
Item Number: FM409
Heavy gauge pressed steel Junction box and Cover through which electrical connections to the power supply can be made at the end of the track run. Has concentric knock-outs in the end for 1-3/8", 1-3/4" or 2" conduit. Terminals included accomodate No. 14 to 4 standard wire. 4 poles, 60 amps, for 600 volt system.
Feeedrail Dead End Cap for FM and FX Series Multi-Conductor Trolley Service - 300 Volt
Item Number: FX507
Heavy gauge pressed steel box for enclosing the end of track run. Includes a trolley stop and end insulator. For 300 volt systems.
Feeedrail Dead End Cap for FM and FX Series Multi-Conductor Trolley Service - 600 Volt
Item Number: FM407
Heavy gauge pressed steel box for enclosing the end of track run. Includes a trolley stop and end insulator. For 600 volt systems.
Feedrail Heavy Gauge Pressed Steel Coupling Set for All Straight Track Sections
Item Number: FX102
Set of two heavy gauge pressed steel plates serves as a coupling for all straight track sections. Set includes bus bar connectors. One Coupling Set required with each track joint, order separately.
Feedrail Transfer Hanger for Supporting Strap
Item Number: FX198
Heavy gauge steel for mounting of track sections supporting strap or angle, etc. Fits over rib on top of track. Complete with 3/8" bolt.
Feedrail Track Hanger Set for 3/8" Rod
Item Number: FX199
Heavy gauge steel for intermediate support of track from rods. 7/16"Dia. hole in top takes 3/8" rod.
Feedrail Auxilliary Track Hanger Set
Item Number: FR140
Heavy gauge pressed steel plates for intermediate mounting of track sections to supporting members. Fits over top of straight track housing rib at any of the insulator bolting points. Complete with 3/8" mounting bolt.