Air Tools, Parts & Accessories

Item Number: 10808

Styles: MFC-2

Combination needle and check valve controls flow in one direction. In line mounting with knurled knob adjustment. Maximum flow at 50 p.s.i./5.4 c.f.m. and 100 p.s.i./9.5 c.f.m. 10-32 ports.

Item Number: 11188

Styles: MNV-1KP

Restricts flow in both directions. In line mounting with knurled knob adjustment. Maximum flow at 50 p.s.i./3.2 c.f.m. and 100 p.s.i./6 c.f.m. Ports: Inlet 1/8-27 NPT; Outlet 10-32.

Item Number: 11001

Styles: SMAV-3

Sub-miniature 3-way stem operated spool valve (N.C.or N.O.) has 100 p.s.i. maximum working pressure. Air flow at 100 p.s.i./1.4 c.f.m. All ports 3-56 with 1/16" I.D. hose barbs. Mounts on 1/4-40 thread and nut supplied. Maximum panel thickness 3/16". Weight 1/3 ounce. Made in U.S.A.

Item Number: 30125

Styles: AS2201F-NO1-07S

AS speed controllers with push-lock allow tool-free flow rate adjustment. Elbow type with one-touch fitting, featuring larger push-lock handles for easier use. Clearly marked blue (meter-in) and gray (meter-out) handles. Max pressure: 1MPa. Compatible with nylon, soft nylon, and polyurethane tubing.

Item Number: 30123

Styles: AS1201FU10/3203

AS speed controllers with push-lock allow tool-free flow rate adjustment. Elbow type with one-touch fitting, featuring larger push-lock handles for easier use. Clearly marked blue (meter-in) and gray (meter-out) handles. Max pressure: 1MPa. Compatible with nylon, soft nylon, and polyurethane tubing.

Item Number: 12988

Styles: PV-1P

Normally open 3-way valves that close shortly after being pressurized and remains closed until pressure supplied is exhausted. Converts continuous supply of inlet air into a pulse of approximately 100 milli-seconds. Working range 30 to 150 p.s.i. Volume chamber 10-32. For mounting when 10-32 input is used for piping. Can be mounted by 1/8” male thread and nut supplied.

Item Number: 10858

Styles: 21015

Poppet type brass quick exhaust valve for providing fast cylinder return in long lines. Maximum working pressure 150 p.s.i. Flow at 50 p.s.i./4.8 c.f.m. and 100 p.s.i./8.8 c.f.m. At 50 p.s.i. opens at 5 p.s.i. Ports: Line and exhaust 10-32 female, cylinder 10-32 male. Mounts direct to cylinder. Not for use with cylinders larger than 7/8" diameter and 10" stroke.

Item Number: 12532

Styles: EV125A

By providing quick dumping of exhaust air at the cylinder, Quick Air Exhaust Valves eliminate any need for large diameter piping or large selector valves. This, in turn, permits smoother cylinder operation. For best results, install in air line at cylinder being vented. 1-1/2" wide, 1-23/32" deep and 1-7/16" high.

Item Number: 18398

Styles: P2MN

Ideal for maximizing airflow in solenoid exhaust ports, these mufflers feature porous sintered bronze and connect to standard fittings. Compact and affordable, they're easy to install and maintain, ideal for tight spaces. Effectively reduce noise from air valves, cylinders, and tools to meet OSHA standards.

Item Number: 18397

Styles: MS001A

Ideal for maximizing airflow in solenoid exhaust ports, these mufflers feature porous sintered bronze and connect to standard fittings. Compact and affordable, they're easy to install and maintain, ideal for tight spaces. Effectively reduce noise from air valves, cylinders, and tools to meet OSHA standards.

Item Number: 18628

Styles: 091

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 10037

Styles: 091D

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 10022

Styles: 091DP

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 10012

Styles: 091P

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 11038

Styles: 092

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 18633

Styles: 092-DP

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 18631

Styles: 092-RP

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 11435

Styles: 093-DP

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 10023

Styles: 094DP

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 11103

Styles: 096-DP

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 10039

Styles: 171D

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 11247

Styles: 121

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 10944

Styles: 041-D

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 10020

Styles: 041DP

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 18627

Styles: 041-R

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 17996

Styles: 042

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 10957

Styles: 042-D

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 10021

Styles: 043-DP

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 13503

Styles: 044-DP

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 10041

Styles: 044NR

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 11430

Styles: 046-DP

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 11418

Styles: 011-RP

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 11246

Styles: 011.75-D

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 10765

Styles: 012

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 18632

Styles: 012-DP

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 10056

Styles: 020.5-DXP

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 19905

Styles: 021

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 19904

Styles: 021-DXP

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 18002

Styles: 092-NR

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 17999

Styles: 041-NR

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 18000

Styles: 042-NR

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 17997

Styles: 011-NR

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 10014

Styles: 042R

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 10019

Styles: 011DP

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 10010

Styles: 011-P

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 17995

Styles: 041

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 11096

Styles: 043-NR

Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.

Item Number: 16555

Styles: D-166-1

Includes clevis, nut, pin and 2 spring clips.

Item Number: 16557

Styles: D-231-1

Includes clevis, nut, pin and 2 spring clips.

Item Number: 16556

Styles: D-166-3

Includes clevis, nut, pin and 2 spring clips.

Item Number: 16559

Styles: D-850

Includes clevis, nut, pin and 2 spring clips.

Item Number: 13768

Styles: NH10-32

Hex Jam Nut, 10-32

Item Number: 16561

Styles: RFL-115

Hex Jam Nut, Zinc, 1/4-28

Item Number: 17827

Styles: D9

Hex Jam Nut, Zinc, 5/8-18

Item Number: 16541

Styles: D-226

Bimba Foot Bracket, 3/4 Inch Bore (Bimba D-226)

Item Number: 16540

Styles: D-129

Bimba Nose Mount Bracket, 5/8 Inch Bore

Item Number: 16549

Styles: D-167

Bimba Pivot Bracket, 1/4 Inch Pin Diameter

Item Number: 11338

Styles: D-13498-A

For 3/4", 7/8" and 1-1/16" Bore Cylinders. Includes brackets, pin and 2 spring clips.

Item Number: 16551

Styles: D-780

Bimba Pivot Bracket, 5/32 Inch Pin Diameter

Item Number: 11855

Styles: VQZ2150-5M1-01T

4-Way Valve with two exhaust ports (A and B output ports to cylinder) and one input (P) port. All ports are 1/8" NPT. Manifold Base Mounts using two 3/16" holes in base. 24 volt DC.

Item Number: 10621

Styles: 35A-AAA-DDAA1BA

1/8" NPT Ports, Flow Capacity 5 cfm @ 80 p.s.i., 5.4 Watt Coil with 18" Leads, Pressure Range Vacuum to 120 p.s.i., Manual Override, Mounting Inline or through 2 holes 1/8" dia. 24 volt DC.

Item Number: 10623

Styles: 45A-AA1-DDAA1BA

2/3-Way Solenoid Valve with three ports (inlet, outlet (cylinder) and exhaust). For use with spring return cylinders or other applications where air on operates the device. For 2-Way operation plug Exhaust Port.

Item Number: 12503

Styles: 8262H2-120

Air 155 p.s.i., water 180 p.s.i. and light oil 140 p.s.i. Brass body with Buna 'N' Disc. Normally closed.

Item Number: 12500

Styles: 8263H059-240

160 p.s.i. air, 140(90) p.s.i. steam/water and 135 p.s.i. oil. Brass body and stainless steel seat. Normally closed.

Item Number: 11069

Styles: MPA-3

Single acting, spring return, 15/32-32 female thread mounts to Clippard miniature valves and other devices, Made in U.S.A.

Item Number: 11070

Styles: MPA-3P

Single acting, spring return, 15/32-32 female thread mounts to Clippard miniature valves and other devices, Made in U.S.A.

Item Number: 10897

Styles: 34ASR

For Humphrey TAC, TAC2, and TAC3 Valves. Threads onto any TAC push button valve and Micro Switch (No. 2669). Air pressure applied to pilot port drives 'V' cup sealed piston to actuate valve or switch push button. Maximum pilot pressure 125 p.s.i.

Item Number: 10906

Styles: 341ASR

PILOT OPERATOR 1/8"

Item Number: 17726

Styles: 31P

Multi-purpose spring return valve may be used as a 2-way or 3-way, N.C. or N.O., diverter valve or dual pressure. For 2-way plug N.C. or N.O. port not used. All ports 1/8" NPT. Weight 4-1/4 ounces, size 1-5/16" high, 1-1/4" wide and 5/8" thick. Mounts with two #6 screws or use body threads for bracket or panel mounting.

Item Number: 16893

Styles: MJV-2-BLK

Stem travel 1/8". Maximum working pressure 300 p.s.i. Air flow at 50 p.s.i./14 c.f.m. and at 100 p.s.i./25 c.f.m. Ports 1/8" female except exhaust through hole in valve body. Mounting 15/32-32 male thread. Nuts and lock washers furnished.

Item Number: 10942

Styles: 31V

3-way (NC): Port threads 1/8" female NPT. Plug exhaust port for 2-way valve. 1-5/16" high, 1-1/4" wide and 5/8" thick. Mounts with two #10 screws or use body threads for bracket or panel mounting.

Item Number: 18540

Styles: MJV-3-BLK

Stem travel 1/8". Maximum working pressure 300 p.s.i. Air flow at 50 p.s.i./14 c.f.m. and at 100 p.s.i./25 c.f.m. Ports 1/8" female except exhaust through hole in valve body. Mounting 15/32-32 male thread. Nuts and lock washers furnished.

Item Number: 11000

Styles: MJTV-3

3-Way poppet, two position toggle valve can be used as a 2-Way valve by plugging exhaust port. Maximum working pressure 300 p.s.i. Air flow at 50 p.s.i./14 c.f.m. and at 100 p.s.i./25 c.f.m. All Ports 1/8" female NPT. Mounting 15/32-32 male thread. Nuts and lock washers furnished.

Item Number: 13020

Styles: 41PP

4-way, N.C. or N.O., 5 ports, spring return. Ports 1/8" NPT, exhaust port 10/32. Exhaust port flow controls furnished. Weight 5-1/4 ounces, size 1-21/32" high, 1-1/4" wide and 5/8" thick. Mounts with three #6 screws or use body threads for bracket or panel mounting.

Item Number: 17040

Styles: 4-P TAC

4-way (4P) NC/NO spring return valve converts to 3-way by plugging one cylinder port. Ports: In and cylinder 10-32 female.

Item Number: 10954

Styles: 41V

4-way (NO/NC): Port threads 1/8" female NPT except exhaust is 10-32. Exhaust flow controls furnished. When removed exhaust may be muffled. 1-21/32" high, 1-1/4" wide and 5/8" thick. Mount with three #6 screws or use body threads for bracket or panel mounting.

Item Number: 18541

Styles: MJV-4

The MJV/MJVO series are high flow 1/8" NPT ported 2-Way, 3-Way and 4-Way valves that change their flow path when the stem is either depressed or released (spring return). The 2-Way and 3-Way valves are offered in both Normally-Closed and Normally-Open versions.

Item Number: 18542

Styles: MJV-4D

Stem travel 3/16". Maximum working pressure 150 p.s.i. Air flow at 50 p.s.i./8 c.f.m. and 100 p.s.i./14 c.f.m. Ports same as other MJV valves above. Mounting with 15/32-32 male thread or through two .201" diameter mounting holes in body.

Item Number: 17727

Styles: 41P

4-way, N.C. or N.O., 5 ports, spring return. Ports 1/8" NPT, exhaust port 10/32. Exhaust port flow controls furnished. Weight 5-1/4 ounces, size 1-21/32" high, 1-1/4" wide and 5/8" thick. Mounts with three #6 screws or use body threads for bracket or panel mounting.

Item Number: 11036

Styles: MAV-3

MAV miniature valves are normally closed poppets, with stem travel of 1/8", and maximum working pressure of 300 p.s.i. Air flow at 50 p.s.i./4 c.f.m. and at 100 p.s.i./6.8 c.f.m. All ports 10-32. Mounts on 15/32-32 male thread. Nut and lock washers furnished.

Item Number: 11059

Styles: 11916-1

Mounts directly on 1/8-inch valve stem. Prevents over travel of valve stem by providing a positive stop. Button locks in place by set screw (Allen Wrench furnished).

Item Number: 16804

Styles: RS-10

Mounts directly on 3/16-inch valve stem. Prevents over travel of valve stem by providing a positive stop. Button locks in place by set screw (Allen Wrench furnished).

Item Number: 11065

Styles: 11925

Stainless steel with nylon roller. 1/2" dia. mounting hole fits 15/32-32 threaded mounting section of valve bodies.

Item Number: 11220

Styles: MA-33

Spring return button valves with 1/8" female IPT ports and three 1/8" holes for mounting. 3-way valve may be converted to a 2-way valve by plugging one port. Ideal for operating single and double acting cylinders, knee switches, as well as vacuum control, and many other applications.

Item Number: 11337

Styles: 30-0886-01

Spring return button valves with 1/8" female IPT ports and three 1/8" holes for mounting. 4-way valve may be converted to a 3-way valve by plugging one port. Ideal for operating single and double acting cylinders, knee switches, as well as vacuum control, and many other applications.

Item Number: 16821

Styles: 015629

Two position/spring return, 2/3-way pilot valves. Mount in any position in-line or base. Capacity at 125 p.s.i. 125A/27.5 c.f.m. and 250A/75 c.f.m.

Item Number: 10143

Styles: 015615

Two position/spring return, 2/3-way pilot valves. Mount in any position in-line or base. Capacity at 125 p.s.i. 125A/27.5 c.f.m. and 250A/75 c.f.m.

Item Number: 18786

Styles: 28-1491

For use with Single Acting Spring Return or Double Acting Cylinders, Air Operated Scissor Cutters, Impact Cutters, Air Vacuums, etc. 4-way valve may be operated as a 2 or 3-way valve. All valve ports are 1/8" female pipe, but supplied with 1/4" tube X 1/8" elbow inlet fitting and 1/4" tube X 1/8" male outlet connectors, as well as knee pad and mounting screws. Manufactured by Universal in U.S.A.

Item Number: 11083

Styles: 34T

34T Finger Tip Operator adapts to any TAC series valve for easier operation. 8-600 Mounting Bracket is not included.

Item Number: 17725

Styles: 125PLG

3-way normally closed valve may be mounted through a panel or on its base or side bracket. Guard prevents accidental actuation but does not prevent palm operation due to the short .030" stroke. Concurrent operation of the two No. 17725 Hand Valves maintains air output as long as both valves are held actuated.

Item Number: 12177

Styles: 3C-30A2-S

3-Way air foot valve 4-1/2" deep by 3-1/2" wide by 1-3/4" high. Weighs 2-1/4 lbs. Air line connections are 1/8-27 female pipe thread. Air flow 30 cfm at 100 lbs. p.s.i. Operates on line pressures up to 150 p.s.i. Black wrinkle painted cast iron construction with skid-proof base pad. Mounting 7/32" diameter holes on 2-7/8" centers.

Item Number: 12176

Styles: 3B-30A2-S

3-Way compact air foot valve, 2-7/8" deep by 2-1/2" wide by 1-1/4" high. Weighs 7 ounces. Air line connections are 1/8-27 female pipe thread. Air flow 30 cfm at 100 lbs. p.s.i. Operates on line pressures up to 150 p.s.i. Black painted pressed steel construction.

Item Number: 12540

Styles: 250F-3-10

Designed to meet OSHA requirements. Guard protects valve and foot from falling objects. Four rubber feet may be removed for permanent mounting. May be operated from sitting or standing position. Model 250F may be used as 2 or 3-way valve N.C. Model 250-4F is a 4-way/5-port valve furnished N.C./N.O. All port connections are 1/4" IPT. Will handle cylinders up to 3-1/2" diameter.

Item Number: 12541

Styles: 250-4F-10

Designed to meet OSHA requirements. Guard protects valve and foot from falling objects. Four rubber feet may be removed for permanent mounting. May be operated from sitting or standing position. Model 250F may be used as 2 or 3-way valve N.C. Model 250-4F is a 4-way/5-port valve furnished N.C./N.O. All port connections are 1/4" IPT. Will handle cylinders up to 3-1/2" diameter.

Item Number: 11084

Styles: 34F

34F Operator is for all TAC series 'P' valves. Will not function with TAC3. 2-5/8" wide, 3-7/16" long and 1-1/2" high. Mount valve shoulder to bracket. Retain with lock nut and lock washer. Back and sides are open for plumbing. Non-skid rubber pads on both sides. Mount with two (2) 3/16" diameter holes on 1-5/8" centers, 9/16" from back.

Item Number: 16100

Styles: TBV-110LT

Lite-Touch treadle rod air switches need 72% less toe pressure for activation, ideal for electronic motors at low speeds. They work with standard clutch type or 24V DC signal motors, eliminating the need for clutch adjustments. Smooth action reduces wear. The 3-Position Toe & Heel model includes heel activation for pneumatic cylinders, perfect for continuous air. All-metal construction with 10 ft. or 20 ft. tubing included.

Item Number: 16103

Styles: TBV-1000S

Chain and waste removal complete package includes TBV-1000S includes the TBV-400 1-1/2" chain & waste vacuum assembly, the TBV-190 waste bag unit, 12 gallon capacity, and the MSB150: 1-1/2" muffler.

Item Number: 11228

Styles: TBV-200

Used for all chain cutters regardless of manufacturer. Amount of vacuum can be regulated for the type of thread and material used. All metal construction. Assembly operates best at 80 p.s.i. and comes complete with needle valve for vacuum adjustment, 38" of suction hose, 2' of discharge hose, and mounting hardware. Use with a Lite-Touch treadle rod air switch.

Item Number: 16134

Styles: TBV-400

Dual chain and waste removal vacuum assembly. Designed to remove edge trimming waste and lint in addition to removal of cut chain threads from chain cutter assemblies. Operates best at 80 p.s.i. Diameter is 1-1/2".

Item Number: 16135

Styles: TBV-125

Multi-purpose waste removal vacuum assembly that can be installed on most any sewing machine. Operates best at 80 p.s.i. and can be adapted to overlock, single needle lockstitch, etc. Hose diameter is 1-1/2".