Air Tools, Parts & Accessories
High quality pneumatic tools and accessories are indispensable in the sewing and textile industry, driving efficiency, precision, and reliability in manufacturing processes. Universal Sewing Supply understands the critical role these tools play in enhancing productivity and maintaining superior craftsmanship. From pneumatic shears that ensure clean and swift fabric cutting to specialized attachments that streamline stitching and embroidery, our range of products meets the demanding needs of modern textile operations. With Universal Sewing Supply, businesses can optimize their production workflows, reduce downtime, and achieve consistent, high-quality results, thereby staying competitive in the dynamic textile market. If you are unable to find what you are looking for, please contact our sales department.
Bimba Piston Rod Clevis Assembly, 1-1/2" Bore, 7/16-20 Rod Thread, 3/8" Clip Diameter
Item Number: 16557
Includes clevis, nut, pin and 2 spring clips.
Bar-Lok UV Resistant Cable Ties by Avery Dennison - 1000 Ties, Black, 6/6 Nylon, 18#, 4" (101.6mm)
Item Number: AMZ08433
1000 Bar-Lok ties, black, 6/6 nylon, 18#, 4" (101.6mm).
Bimba Air Cylinder 1-1/16" x 1" (Bimba 091-P)
Item Number: 10012
Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.
Lever-Action Air Booster Safety Blow Gun, .25" NPT
Item Number: 16392
This 1/4" NPT booster blow-gun features a special tip with side venturi holes that provides greater air volume while still remaining 30 p.s.i.
MAV Miniature 3-Way Valve #10-32
Item Number: 11036
MAV miniature valves are normally closed poppets, with stem travel of 1/8", and maximum working pressure of 300 p.s.i. Air flow at 50 p.s.i./4 c.f.m. and at 100 p.s.i./6.8 c.f.m. All ports 10-32. Mounts on 15/32-32 male thread. Nut and lock washers furnished.
One-Touch Air Flow Speed Control L-Valve, 1/4 OD x 1/8 Inch MPT
Item Number: 30125
AS speed controllers with push-lock allow tool-free flow rate adjustment. Elbow type with one-touch fitting, featuring larger push-lock handles for easier use. Clearly marked blue (meter-in) and gray (meter-out) handles. Max pressure: 1MPa. Compatible with nylon, soft nylon, and polyurethane tubing.
Bimba Air Cylinder, 7/16" x 1" (Bimba 011-P)
Item Number: 10010
Bimba Air Cylinders use stainless steel body which has inherent resistance to scoring. Bimba cylinders equipped with Buna 'N' U-cups perform at top efficiency in every instant of application. Single, double and reverse acting models. Mirror finish I.D., threaded ground and polished piston rods. Rated maximum air pressure 250# p.s.i.
Tubing, White, .170" ID x .250" OD x 100' Length
Item Number: 10000
Polyethylene (Poly) tubing is flexible and oil resistant. Most commonly used for air and fluid applications where pressures do not exceed 133 p.s.i. For assembly with barb, poly plastic or tube-ins. Sold in 100 feet rolls.
Lever-Action Safety Blow Gun, .25" NPT
Item Number: 10004
Safety Blow Guns conform fully with the government regulation barring the use of compressed air for cleaning at outlet pressures over 30 p.s.i. They also conform with the government regulation regarding occupational noise level exposure.
1-1/2 Inch Pressure Gauge, 0-160 KPA, 0-11 Bar
Item Number: 9345
Gauges have male pipe center back connection.
Clippard Miniature Needle Valve, 1/8-27 NPT Inlet, #10-32 Outlet
Item Number: 11188
Restricts flow in both directions. In line mounting with knurled knob adjustment. Maximum flow at 50 p.s.i./3.2 c.f.m. and 100 p.s.i./6 c.f.m. Ports: Inlet 1/8-27 NPT; Outlet 10-32.
Clippard Air Pilot Actuator, #10-32
Item Number: 11069
Single acting, spring return, 15/32-32 female thread mounts to Clippard miniature valves and other devices, Made in U.S.A.
Humphrey 34T Finger Tip Operator
Item Number: 11083
34T Finger Tip Operator adapts to any TAC series valve for easier operation. 8-600 Mounting Bracket is not included.
Push-to-Connect Brass 1/4" Connector with 3/8" Male NPTF Threads
Item Number: 10316
Push In Fittings are one piece brass for use with polyethylene or nylon tubing. Special tools are not needed. Just push tubing into fitting until it bottoms. Once tubing is inserted into fitting the tubing can rotate freely. By depressing the release ring the tubing is easily removed. A real time saver - fast and efficient. Does not restrict air flow as barb inserted fittings do.
Clippard Miniature Quick Exhaust Valve, #10-32
Item Number: 10858
Poppet type brass quick exhaust valve for providing fast cylinder return in long lines. Maximum working pressure 150 p.s.i. Flow at 50 p.s.i./4.8 c.f.m. and 100 p.s.i./8.8 c.f.m. At 50 p.s.i. opens at 5 p.s.i. Ports: Line and exhaust 10-32 female, cylinder 10-32 male. Mounts direct to cylinder. Not for use with cylinders larger than 7/8" diameter and 10" stroke.
Clippard Air Pilot Actuator, 1/8 Inch NPT
Item Number: 11070
Single acting, spring return, 15/32-32 female thread mounts to Clippard miniature valves and other devices, Made in U.S.A.
Push-to-Connect Brass 1/4" 90° Elbow with 1/4" Male NPTF Threads
Item Number: 18442
Push In Fittings are one piece brass for use with polyethylene or nylon tubing. Special tools are not needed. Just push tubing into fitting until it bottoms. Once tubing is inserted into fitting the tubing can rotate freely. By depressing the release ring the tubing is easily removed. A real time saver - fast and efficient. Does not restrict air flow as barb inserted fittings do.
Bar-Lok UV Resistant Cable Ties by Avery Dennison - 100 Ties, Black, 6/6 Nylon, 50#, 15" (381mm)
Item Number: AMZ08428
100 Bar-Lok ties, black, 6/6 nylon, 50#, 15" (381mm).
Waste Collection Bag, 12 Gallon, Table-Mount
Item Number: 11227
Table-mount waste bag unit - This waste collection unit has a narrow profile (7-3/4" wide), attaches directly to either end of the table top, and has a 20 gallon capacity. It features a tool tray for storing scissors, snips, tweezers, etc. Has a 3-1/4" diameter spring loaded door for disposal of other work area trash.
Nylon One-Touch Instant Fittings, 5/32" Y-Union
Item Number: 30106
The body of One Touch Fittings are made from tough PBT material for improved resistance to breakage. Tube release button has a low disconnection force enabling the collet and chuck to be released with little effort. Special design packing for positive tube sealing while the fitting is under pressure which allows even polyurethane tubing to be used. In addition, it allows for less resistance when tubing is inserted.
Bimba Piston Rod Clevis Assembly, 7/16" Bore, 10-32 Rod Thread, 3/16" Clip Diameter
Item Number: 16559
Includes clevis, nut, pin and 2 spring clips.
Nylon One-Touch Instant Fittings, 1/4" Y-Union
Item Number: 30119
The body of One Touch Fittings are made from tough PBT material for improved resistance to breakage. Tube release button has a low disconnection force enabling the collet and chuck to be released with little effort. Special design packing for positive tube sealing while the fitting is under pressure which allows even polyurethane tubing to be used. In addition, it allows for less resistance when tubing is inserted.
Bimba Pivot Bracket, 3/4, 7/8 & 1-1/16 Inch Bore
Item Number: 11338
For 3/4", 7/8" and 1-1/16" Bore Cylinders. Includes brackets, pin and 2 spring clips.
Bimba Piston Rod Clevis Assembly, 1-1/16" Bore, 5/16-24 Rod Thread, 1/4" Clip Diameter
Item Number: 16555
Includes clevis, nut, pin and 2 spring clips.
Bimba Piston Rod Clevis Assembly, 3/4" Bore, 1/4-28 Rod Thread, 1/4" Clip Diameter
Item Number: 16556
Includes clevis, nut, pin and 2 spring clips.
One-Touch Air Flow Speed Control L-Valve, 5/32 OD x 10-32 MPT
Item Number: 30123
AS speed controllers with push-lock allow tool-free flow rate adjustment. Elbow type with one-touch fitting, featuring larger push-lock handles for easier use. Clearly marked blue (meter-in) and gray (meter-out) handles. Max pressure: 1MPa. Compatible with nylon, soft nylon, and polyurethane tubing.
Brass Male Swivel Connector Fitting for 1/4 Inch Re-Coiling Air Hoses
Item Number: 12202
Brass male swivel connector fitting for 1/4 inch inside diameter re-coiling air hoses.
Roller Cam Follower Actuator
Item Number: 11065
Stainless steel with nylon roller. 1/2" dia. mounting hole fits 15/32-32 threaded mounting section of valve bodies.
Bimba Pivot Bracket, 1/4 Inch Pin Diameter
Item Number: 16549
Bimba Pivot Bracket, 1/4 Inch Pin Diameter
Bimba Pivot Bracket, 5/32 Inch Pin Diameter
Item Number: 16551
Bimba Pivot Bracket, 5/32 Inch Pin Diameter
Brass Air-Booster Nozzle Tip for Safety Blow Guns
Item Number: 13567
Air booster brass nozzle tip for safety blow guns.
Universal Adjustable L-Fitting with Nitrile O-Rings
Item Number: 16779
Stud is stainless steel hex head with screwdriver slot. Complete with O-ring and gasket. Permits port to be set in any direction 360°. Secure by tightening screw stud.
Nylon One-Touch Instant Fittings, 1/4" T-Union
Item Number: 30115
The body of One Touch Fittings are made from tough PBT material for improved resistance to breakage. Tube release button has a low disconnection force enabling the collet and chuck to be released with little effort. Special design packing for positive tube sealing while the fitting is under pressure which allows even polyurethane tubing to be used. In addition, it allows for less resistance when tubing is inserted.
Push-to-Connect Brass 3/8" Connector with 1/4" Male NPTF Threads
Item Number: 10317
Push In Fittings are one piece brass for use with polyethylene or nylon tubing. Special tools are not needed. Just push tubing into fitting until it bottoms. Once tubing is inserted into fitting the tubing can rotate freely. By depressing the release ring the tubing is easily removed. A real time saver - fast and efficient. Does not restrict air flow as barb inserted fittings do.
Nylon One-Touch Male Run Tee, 1/4" Tube OD, 1/8" NPT Male
Item Number: 30116
The body of One Touch Fittings are made from tough PBT material for improved resistance to breakage. Tube release button has a low disconnection force enabling the collet and chuck to be released with little effort. Special design packing for positive tube sealing while the fitting is under pressure which allows even polyurethane tubing to be used. In addition, it allows for less resistance when tubing is inserted.
Double-Barb Brass Tube Tee, 3/8-Inch
Item Number: 18403
Double-Barb Brass Fittings permit fast, sure connections of thermo-plastic tubing (polyethylene). One-piece, push-on design features a barbed lip that rings the tip of the insert. Safe, positive, leak-proof connections that won't shake loose, won't pull out, won't pop off when Barb Fittings are used within the normal pressure and temperature ranges of tubing used.
Push-to-Connect Brass Instant Fittings, 1/4" T-Union
Item Number: 18427
Push In Fittings are one piece brass for use with polyethylene or nylon tubing. Special tools are not needed. Just push tubing into fitting until it bottoms. Once tubing is inserted into fitting the tubing can rotate freely. By depressing the release ring the tubing is easily removed. A real time saver - fast and efficient. Does not restrict air flow as barb inserted fittings do.
Bimba Nose Mount Bracket, 1/2 Inch Bore
Item Number: 16541
Bimba Foot Bracket, 3/4 Inch Bore (Bimba D-226)
Bar-Lok UV Resistant Cable Ties by Avery Dennison - 100 Ties, Black, 6/6 Nylon, 50#, 11" (279.4mm)
Item Number: AMZ08930
1000 Bar-Lok ties, black, 6/6 nylon, 50#, 11" (279.4mm).
Mini-Barb Male Connector, 3/8" Tubing OD, 1/4" Male Pipe
Item Number: 18409
Double-Barb Brass Fittings permit fast, sure connections of thermo-plastic tubing (polyethylene). One-piece, push-on design features a barbed lip that rings the tip of the insert. Safe, positive, leak-proof connections that won't shake loose, won't pull out, won't pop off when Barb Fittings are used within the normal pressure and temperature ranges of tubing used.
Nylon One-Touch Instant Fittings, 5/32" T-Union
Item Number: 30114
The body of One Touch Fittings are made from tough PBT material for improved resistance to breakage. Tube release button has a low disconnection force enabling the collet and chuck to be released with little effort. Special design packing for positive tube sealing while the fitting is under pressure which allows even polyurethane tubing to be used. In addition, it allows for less resistance when tubing is inserted.
Double-Barb Brass Tube Tee, 1/4-Inch
Item Number: 18402
Double-Barb Brass Fittings permit fast, sure connections of thermo-plastic tubing (polyethylene). One-piece, push-on design features a barbed lip that rings the tip of the insert. Safe, positive, leak-proof connections that won't shake loose, won't pull out, won't pop off when Barb Fittings are used within the normal pressure and temperature ranges of tubing used.
Push-to-Connect Brass 1/4" 90° Elbow with 1/8" Male NPTF Threads
Item Number: 18439
Push In Fittings are one piece brass for use with polyethylene or nylon tubing. Special tools are not needed. Just push tubing into fitting until it bottoms. Once tubing is inserted into fitting the tubing can rotate freely. By depressing the release ring the tubing is easily removed. A real time saver - fast and efficient. Does not restrict air flow as barb inserted fittings do.
Push-to-Connect Brass 1/4" 90° Elbow Swivel with 1/8" Male NPTF Threads
Item Number: 18535
Push In Fittings are one piece brass for use with polyethylene or nylon tubing. Special tools are not needed. Just push tubing into fitting until it bottoms. Once tubing is inserted into fitting the tubing can rotate freely. By depressing the release ring the tubing is easily removed. A real time saver - fast and efficient. Does not restrict air flow as barb inserted fittings do.
Push-to-Connect Brass 1/4" 90° Elbow Swivel with 1/4" Male NPTF Threads
Item Number: 18572
Push In Fittings are one piece brass for use with polyethylene or nylon tubing. Special tools are not needed. Just push tubing into fitting until it bottoms. Once tubing is inserted into fitting the tubing can rotate freely. By depressing the release ring the tubing is easily removed. A real time saver - fast and efficient. Does not restrict air flow as barb inserted fittings do.
Mini-Barb Female Connector, Short Thread, 1/4" Tubing OD, 1/8" Female Pipe
Item Number: 10148
Double-Barb Brass Fittings permit fast, sure connections of thermo-plastic tubing (polyethylene). One-piece, push-on design features a barbed lip that rings the tip of the insert. Safe, positive, leak-proof connections that won't shake loose, won't pull out, won't pop off when Barb Fittings are used within the normal pressure and temperature ranges of tubing used.
Push-to-Connect Brass Instant Fittings, 1/4" Union
Item Number: 18425
Push In Fittings are one piece brass for use with polyethylene or nylon tubing. Special tools are not needed. Just push tubing into fitting until it bottoms. Once tubing is inserted into fitting the tubing can rotate freely. By depressing the release ring the tubing is easily removed. A real time saver - fast and efficient. Does not restrict air flow as barb inserted fittings do.
Brass Air Hose Barbs, 1/4" OD Tube, 1/4" NPT
Item Number: 18407
Double-Barb Brass Fittings permit fast, sure connections of thermo-plastic tubing (polyethylene). One-piece, push-on design features a barbed lip that rings the tip of the insert. Safe, positive, leak-proof connections that won't shake loose, won't pull out, won't pop off when Barb Fittings are used within the normal pressure and temperature ranges of tubing used.
Brass Air Hose Barb, 90° Elbow, 1/4" OD Tube, 1/8" NPT
Item Number: 18410
Double-Barb Brass Fittings permit fast, sure connections of thermo-plastic tubing (polyethylene). One-piece, push-on design features a barbed lip that rings the tip of the insert. Safe, positive, leak-proof connections that won't shake loose, won't pull out, won't pop off when Barb Fittings are used within the normal pressure and temperature ranges of tubing used.
Bar-Lok UV Resistant Cable Ties by Avery Dennison - 100 Ties, Black, 6/6 Nylon, 40#, 8" (203.2mm)
Item Number: AMZ08386
100 Bar-Lok ties, black, 6/6 nylon, 40#, 8" (203.2mm).
Nylon One-Touch Instant Fittings, 1/4" Straight Union
Item Number: 30112
The body of One Touch Fittings are made from tough PBT material for improved resistance to breakage. Tube release button has a low disconnection force enabling the collet and chuck to be released with little effort. Special design packing for positive tube sealing while the fitting is under pressure which allows even polyurethane tubing to be used. In addition, it allows for less resistance when tubing is inserted.
Nylon One-Touch 5/32" 90° Elbow with #10-32 Male Threads
Item Number: 30102
The body of One Touch Fittings are made from tough PBT material for improved resistance to breakage. Tube release button has a low disconnection force enabling the collet and chuck to be released with little effort. Special design packing for positive tube sealing while the fitting is under pressure which allows even polyurethane tubing to be used. In addition, it allows for less resistance when tubing is inserted.
Mini-Barb Male Connector, 3/8" Tubing OD, 1/8" Male Pipe
Item Number: 18408
Double-Barb Brass Fittings permit fast, sure connections of thermo-plastic tubing (polyethylene). One-piece, push-on design features a barbed lip that rings the tip of the insert. Safe, positive, leak-proof connections that won't shake loose, won't pull out, won't pop off when Barb Fittings are used within the normal pressure and temperature ranges of tubing used.
Bar-Lok UV Resistant Cable Ties by Avery Dennison - 100 Ties, Black, 6/6 Nylon, 50#, 7.5" (190.5mm)
Item Number: AMZ08437
100 ties, black, 6/6 nylon, 50#, 7.5" (190.5mm).
Nylon One-Touch 1/4" 90° Elbow with 1/8" Male NPT Threads
Item Number: 30104
The body of One Touch Fittings are made from tough PBT material for improved resistance to breakage. Tube release button has a low disconnection force enabling the collet and chuck to be released with little effort. Special design packing for positive tube sealing while the fitting is under pressure which allows even polyurethane tubing to be used. In addition, it allows for less resistance when tubing is inserted.
Push-to-Connect Brass Instant Fittings, 1/4" Connector with 1/4" Male NPTF Threads
Item Number: 18574
Push In Fittings are one piece brass for use with polyethylene or nylon tubing. Special tools are not needed. Just push tubing into fitting until it bottoms. Once tubing is inserted into fitting the tubing can rotate freely. By depressing the release ring the tubing is easily removed. A real time saver - fast and efficient. Does not restrict air flow as barb inserted fittings do.
Push-to-Connect Brass Instant Fittings, 1/4" Connector with 1/8" Male NPTF Threads
Item Number: 18573
Push In Fittings are one piece brass for use with polyethylene or nylon tubing. Special tools are not needed. Just push tubing into fitting until it bottoms. Once tubing is inserted into fitting the tubing can rotate freely. By depressing the release ring the tubing is easily removed. A real time saver - fast and efficient. Does not restrict air flow as barb inserted fittings do.
Push Button 3/16” Diameter Stem
Item Number: 16804
Mounts directly on 3/16-inch valve stem. Prevents over travel of valve stem by providing a positive stop. Button locks in place by set screw (Allen Wrench furnished).
Mini-Barb Union, 3/8" Tube OD x 1/4" Tube OD
Item Number: 10146
Double-Barb Brass Fittings permit fast, sure connections of thermo-plastic tubing (polyethylene). One-piece, push-on design features a barbed lip that rings the tip of the insert. Safe, positive, leak-proof connections that won't shake loose, won't pull out, won't pop off when Barb Fittings are used within the normal pressure and temperature ranges of tubing used.
Nylon One-Touch Instant Fittings, 5/32" Straight Union
Item Number: 30111
The body of One Touch Fittings are made from tough PBT material for improved resistance to breakage. Tube release button has a low disconnection force enabling the collet and chuck to be released with little effort. Special design packing for positive tube sealing while the fitting is under pressure which allows even polyurethane tubing to be used. In addition, it allows for less resistance when tubing is inserted.
Bar-Lok UV Resistant Cable Ties by Avery Dennison - 100 Ties, Black, 6/6 Nylon, 40#, 5.5" (139.7mm)
Item Number: AMZ08384
100 Bar-Lok ties, black, 6/6 nylon, 40#, 5.5" (139.7mm).
Nylon One-Touch Brass Tube Fitting, 1/4" Tube OD, 1/8" NPT Male
Item Number: 30101
The body of One Touch Fittings are made from tough PBT material for improved resistance to breakage. Tube release button has a low disconnection force enabling the collet and chuck to be released with little effort. Special design packing for positive tube sealing while the fitting is under pressure which allows even polyurethane tubing to be used. In addition, it allows for less resistance when tubing is inserted.
Brass Nozzle Tip for Safety Blow Guns
Item Number: 13566
Standard brass nozzle tip for safety blow guns.
Filter & Regulator Gauge Mounting Bracket
Item Number: 16335
Miniature Filter & Regulator Gauge Mounting Bracket
Brass Adapter, 1/4-18 Male NPT To 1/4-18 Male NPT, Straight Hex Nipple
Item Number: 18556
Brass Adapter, 1/4-18 Male NPT To 1/4-18 Male NPT, Straight Hex Nipple
Nylon One-Touch 5/32" 90° Elbow with 1/8" Male NPT Threads
Item Number: 30103
The body of One Touch Fittings are made from tough PBT material for improved resistance to breakage. Tube release button has a low disconnection force enabling the collet and chuck to be released with little effort. Special design packing for positive tube sealing while the fitting is under pressure which allows even polyurethane tubing to be used. In addition, it allows for less resistance when tubing is inserted.
Push Button 1/8" Diameter Stem
Item Number: 11059
Mounts directly on 1/8-inch valve stem. Prevents over travel of valve stem by providing a positive stop. Button locks in place by set screw (Allen Wrench furnished).
Mini-Barb Union, 3/8" Tube OD x 3/8" Tube OD
Item Number: 18401
Double-Barb Brass Fittings permit fast, sure connections of thermo-plastic tubing (polyethylene). One-piece, push-on design features a barbed lip that rings the tip of the insert. Safe, positive, leak-proof connections that won't shake loose, won't pull out, won't pop off when Barb Fittings are used within the normal pressure and temperature ranges of tubing used.
Bar-Lok UV Resistant Cable Ties by Avery Dennison - 100 Ties, Black, 6/6 Nylon, 18#, 4" (101.6mm)
Item Number: AMZ08435
100 Bar-Lok ties, black, 6/6 nylon, 18#, 4" (101.6mm).
Sintered Bronze Muffler, 1/4 Inch NPT, Male
Item Number: 18398
Ideal for maximizing airflow in solenoid exhaust ports, these mufflers feature porous sintered bronze and connect to standard fittings. Compact and affordable, they're easy to install and maintain, ideal for tight spaces. Effectively reduce noise from air valves, cylinders, and tools to meet OSHA standards.
Male Run Tee, 1/8" Female NPTF x 1/8" Male NPTF x 1/8" Female NPTF
Item Number: 16247
Male Run Tee, 1/8" Female NPTF x 1/8" Male NPTF x 1/8" Female NPTF
Nylon One-Touch Plug-In Reducer, 5/32" x 1/4" Tube OD
Item Number: 30117
The body of One Touch Fittings are made from tough PBT material for improved resistance to breakage. Tube release button has a low disconnection force enabling the collet and chuck to be released with little effort. Special design packing for positive tube sealing while the fitting is under pressure which allows even polyurethane tubing to be used. In addition, it allows for less resistance when tubing is inserted.
Sintered Bronze Muffler, 1/8 Inch NPT, Male
Item Number: 18397
Ideal for maximizing airflow in solenoid exhaust ports, these mufflers feature porous sintered bronze and connect to standard fittings. Compact and affordable, they're easy to install and maintain, ideal for tight spaces. Effectively reduce noise from air valves, cylinders, and tools to meet OSHA standards.
Brass Air Hose Barb, 1/4" OD Tube, 1/8" NPT
Item Number: 18406
Double-Barb Brass Fittings permit fast, sure connections of thermo-plastic tubing (polyethylene). One-piece, push-on design features a barbed lip that rings the tip of the insert. Safe, positive, leak-proof connections that won't shake loose, won't pull out, won't pop off when Barb Fittings are used within the normal pressure and temperature ranges of tubing used.
Brass Adapter, 1/8-27 Male NPT To 1/8-27 Male NPT, Straight Hex Nipple
Item Number: 18555
Brass Adapter, 1/8-27 Male NPT To 1/8-27 Male NPT, Straight Hex Nipple
Mini-Barb Male Connector, 90° Elbow, 3/8" Tubing OD, 1/8" Male Pipe
Item Number: 18412
Double-Barb Brass Fittings permit fast, sure connections of thermo-plastic tubing (polyethylene). One-piece, push-on design features a barbed lip that rings the tip of the insert. Safe, positive, leak-proof connections that won't shake loose, won't pull out, won't pop off when Barb Fittings are used within the normal pressure and temperature ranges of tubing used.
Nylon One-Touch Brass Tube Fitting, 5/32" Tube OD, 1/8" NPT Male
Item Number: 30100
The body of One Touch Fittings are made from tough PBT material for improved resistance to breakage. Tube release button has a low disconnection force enabling the collet and chuck to be released with little effort. Special design packing for positive tube sealing while the fitting is under pressure which allows even polyurethane tubing to be used. In addition, it allows for less resistance when tubing is inserted.
Mini-Barb Union, 1/4" Tube OD x 1/4" Tube OD
Item Number: 18400
Double-Barb Brass Fittings permit fast, sure connections of thermo-plastic tubing (polyethylene). One-piece, push-on design features a barbed lip that rings the tip of the insert. Safe, positive, leak-proof connections that won't shake loose, won't pull out, won't pop off when Barb Fittings are used within the normal pressure and temperature ranges of tubing used.
Brass Multi-Barb Fitting, 1/8" OD Tube, 1/8" NPT
Item Number: 21014
Brass Multi-Barb Fitting, 1/8" OD Tube, 1/8" NPT
Brass Hose Ferrule and Nylon Insert for 1/4 Inch Re-Coiling Air Hoses
Item Number: 12208
Brass hose ferrule and nylon insert for 1/4 inch inside diameter re-coiling air hose.
Brass Bushing 10-32 to 1/8" NPT
Item Number: 16263
Will adapt standard pipe to 10-32 for miniature components. Note: 10-32 fittings are made without undercut threads, allowing fittings to be locked firmly in place by using a thread sealant. If sealant is not used, use No. 16264 Gasket as alternative.
Brass Barb Fitting, 1/8" Tube, 10-32 MPT
Item Number: 16262
Brass Barb Fitting, 1/8" Tube, 10-32 MPT
Mini-Barb Male Connector with Gasket, 1/16" Tubing ID, #10-32 Male Pipe
Item Number: 16778
Mini-Barb Male Connector with Gasket, 1/16" Tubing ID, #10-32 Male Pipe
